Lightweight design strategies and advanced energy applications call for high-strength Al
alloys that can serve in the 300‒400° C temperature range. However, the present …

The age hardening response and tensile properties in an Al-Cu alloy pre-deformed by 20-
80% and post-aged at 120-165° C have been examined to study the effect of mixed …

The evolution of the Ω-phase dispersion during aging in an Al-5.6 Cu-0.72 Mg-0.5 Ag-0.32
Mn-0.17 Sc-0.12 Zr-0.1 Ge-0.08 Ti-0.02 Fe-0.01 Si (wt%) alloy was examined at the …

The deformation behavior of {111} Al Ω plates has been analyzed in an Al-Cu-Mg-Ag alloy
after creep tests to fracture by atomic-resolution scanning transmission electron microscopy …

The multi-principal-component concept of high-entropy alloys (HEAs) generates numerous
new alloys. Among them, nanoscale precipitated HEAs have achieved superior mechanical …

In this work, the effect of non-isothermal aging treatment with the heating rate of 20, 40 and
60° C/h on the precipitation behavior and mechanical properties of the Al-Cu-Mg-Ag alloy …

The mechanical properties and microstructures of the extruded 2196 Al-Cu-Li alloy plates
under different heat treatment parameters are tested and characterized along different …

In this study, the effects of heat treatment on the microstructure and mechanical properties of
extruded 2196 Al-Cu-Li alloy were examined and the precipitation behavior and …

In this work, the microstructures of the electron-beam welded joints of cast Al–Cu–Mg–Ag
alloy plate were investigated in terms of the element segregation, grain structure and …

In this study, the evolution of Ω plates during artificial aging and the effect of peak-aging
treatment and over-aging treatment on the thermal stability of Al–Cu–Mg–Ag alloy were …