The reinforcing effects of biocarbon of varying particle size ranges (crushed,< 500, 500–426,
250–213, and< 63 µm) on biobased polyamide 6, 10 (PA 6, 10) at 20 wt% loading were …

This study was carried out to evaluate the performance of silica mineral composites in
comparison with conventional fused silica composites, which is commonly used as underfill …

In the last few years, the scientific community around the world has devoted a lot of attention
to the search for the best methods of obtaining nanocellulose. In this work, nanocellulose …

The main goal of this research is to investigate the effect of nano‐CaCO3 coated with
different content of stearic acid on fracture toughness of HDPE/CaCO3 nanocomposite. For …

In this work, a new soft dielectric elastomer (DE) was fabricated from dopamine coated
barium titanate particles and silicone rubber (SR). The results showed that the barium …

Fillers are used along with various commodities as well as engineering polymers to improve
the properties of polymers. The performance of filled polymers is generally determined on …

The objective of this study was to evaluate the effect of chicken eggshell (ES) as a bio-filler
on the adhesion strength and thermal stability of acrylic coatings. The influence of different …

Particulate filled polymer composites are becoming attractive because of their wide
applications and low cost. In this study the effects of mica with varying concentration on the …

In this study, the influence of different weight percentages of alumina oxide (Al 2 O 3) and
silicon carbide (SiC) reinforcement on the mechanical properties of Polyamide (PA6) …

Abstract Poly (methyl methacrylate)(PMMA)-microcrystalline cellulose composites with
improved interfacial interaction were prepared by solution casting method using Bis-(3 …