In the present study, stainless steel 316 L (SS316L) and stainless steel 316 infiltrated with
bronze (SS316+ bronze) samples fabricated with binder jet additive manufacturing were …

An ultrasonic evaluation method for grain size based on a high-dimensional model
representation (HDMR) is proposed to solve the difficulty of multiple ultrasonic parameter …

The scope of this study, that is, the effect of the elastic modulus obtained by ultrasonic
method on the physical and mechanical properties of tungsten carbide (WC)-based ceramic …

Abstract B 4 C-30 vol% ZrB 2 ceramic was prepared using hot pressing. The room
temperature and high temperature flexural strength of the as-prepared ceramic were …

Because of rapid heating, cooling, and solidification during metal additive manufacturing
(AM), the resulting products exhibit strong anisotropy and are at risk of quality problems from …

Boron carbide (B 4 C) has wide application in manufacturing of abrasives and cutting tools,
due to its unique features such as high hardness, good wear resistance, low specific weight …

An evaluation model based on multiple ultrasonic parameters was developed to control
mean absolute error between an actual measured value and a model calculation value …

In this study, microstructure, mechanical, tribological and corrosion properties of boron
carbide (B4C) and carbon nanotubes (CNT) reinforced hybrid AISI 316L stainless steel …

In this study, ceramic-metal composite material reinforced with additive prepared from waste
egg-shell was produced. Waste egg-shells were cleaned, dried, ground and then sieved …

Titanium is known to be an indispensable element in biomaterials. In this study, boron
carbide was considered as an alternative to titanium due to its good mechanical properties …