Advances in the nanotechnology have been actively applied to the field of aerospace
engineering where there is a constant necessity of high durable material with low density …

The effect of co-doping of titania and manganese oxide at different weight percentages (0.5–
5 wt%) on sintering behaviour and mechanical properties of alumina were evaluated. The …

Niobium metal was studied for its oxidation behaviour at different temperatures (800, 1000 &
1200° C) and time (1, 3 & 5 h). The study revealed that Nb underwent oxidation forming pro …

Corrosion on turbine blades in calcium magnesium alumino-silicate (CMAS) environment is
a crucial failure for turbine engines and its components. In this study, oxide-oxide (OO) …

ZrSi2 was fabricated via reactive hot-pressing technique for 45 min at 1250° C and 1350° C,
respectively. The hot-pressed sample exhibited Vickers hardness of 10.93±0.32 GPa and …

Thermal decomposition behaviors and microstructure evolution of porous Cr 2 AlC pellet
samples in a graphite bed (65% N 2 and 35% CO) between 1100° C and 1500° C were …

This work aimed to investigate the corrosion behavior of Si-18at% Y alloys in air oxidation
and water-oxygen corrosion environments. The objective was to understand how different …

CMAS corrosion of turbine blades is a crucial failure in turbine engines and their
components. In this study, oxide/oxide CMCs (AS-N610), which are candidates for gas …

As a promising high‐temperature material, MAX phases have attracted much attention
owing to their combined merits of metals and ceramics. In this study, a temperature …

Adjusting the grain growth orientation may be a feasible way to improve the oxidation
resistance. In this work, textured Ti3 (SiAl) C2 ceramic was successfully fabricated via the …