[HTML][HTML] A review of relevant impact behaviour for improved durability of marine composite propellers
Composites are potential replacement materials for marine propellers due to their benefits
including high strength-to-weight ratio, high environmental and fatigue resistance, damping …
including high strength-to-weight ratio, high environmental and fatigue resistance, damping …
Damage behavior and energy absorption characteristics of foamed concrete under dynamic load
S Feng, Y Zhou, QM Li - Construction and Building Materials, 2022 - Elsevier
It is important to understand the damage and energy absorption of porous materials under
dynamic load. As a typical lightweight porous material, foamed concrete has attracted …
dynamic load. As a typical lightweight porous material, foamed concrete has attracted …
On cohesive element parameters and delamination modelling
The cohesive element (CE) has been widely used to model delamination in laminated
composites. The penalty stiffness, interfacial strength and fracture toughness are three CE …
composites. The penalty stiffness, interfacial strength and fracture toughness are three CE …
High-fidelity simulation of low-velocity impact damage in fiber-reinforced composite laminates using integrated discrete and continuum damage models
A high-fidelity finite element (FE) model based on integrated discrete and continuum
damage modeling techniques was developed to predict damage modes, locations, sizes …
damage modeling techniques was developed to predict damage modes, locations, sizes …
Compression-After-Impact analysis of carbon fiber reinforced composite laminate with different ply orientation sequences
This article explores the experimental and numerical study in ABAQUS/explicit of the post-
impact damage progression in carbon/epoxy composite laminate under compression. LVI …
impact damage progression in carbon/epoxy composite laminate under compression. LVI …
Predicting the low velocity impact damage of a quasi-isotropic laminate using EST
In this paper, the low velocity impact (LVI) on a quasi-isotropic laminate [45/0/–45/90] 3s
(QIL) is studied to predict the deformation response and damage state of the laminate. This …
(QIL) is studied to predict the deformation response and damage state of the laminate. This …
Simulation of failure in laminated polymer composites: Building-block validation
The development of numerical tools to complement the experimental determination of
structural design parameters is of key importance to hasten the certification process of new …
structural design parameters is of key importance to hasten the certification process of new …
Compressive buckling and post-buckling behaviors of J-type composite stiffened panel before and after impact load
Q Wu, S Hu, X Tang, X Liu, Z Chen, J Xiong - Composite Structures, 2023 - Elsevier
The compressive buckling and post-buckling behaviors of J-type composite stiffened panels
before and after impact load were investigated through theoretical, numerical and …
before and after impact load were investigated through theoretical, numerical and …
Experimental and numerical analysis of composite fuselage panel impacted by tire burst debris under airworthiness clause
C Lian, P Wang, J Dang, X Wu, Z Yue, Y Chen… - International Journal of …, 2024 - Elsevier
This study focuses on an experimental and numerical simulation investigation on the
dynamic response of the composite fuselage panel under the impact of the tire burst debris …
dynamic response of the composite fuselage panel under the impact of the tire burst debris …
A continuum damage model for composite laminates: Part III-Fatigue
The mesoscale continuum damage model for laminated composites that has been
developed for the past 10 years at AMADE research group is extended for fatigue life and …
developed for the past 10 years at AMADE research group is extended for fatigue life and …