Al-Ni alloys are promising aluminum alloys for high-temperature applications because of
their many good properties partly due to the high stability of the Al 3 Ni eutectic fibers at …

Abstract Dilute Alsingle bondSc alloys (< 0.4 wt% Sc) are creep-resistant up to∼ 300° C
owing to coherent, nanosize Al 3 Sc particles created by solid-state precipitation. By …

The effects of scandium (Sc) additions on the solidification microstructure and mechanical
properties of Al–7Si–0.6 Mg-0.25 Ti alloy at different cooling rates have been systematically …

Abstract Effect of Sc addition and T6 aging treatment on the secondary dendritic arm spacing
(SDAS), modification of eutectic Si morphology, β-Al 5 FeSiand π-Al 8 Mg 3 Si 6 Fe 1 phases …

Abstract Scandium (Sc) and silicon (Si) are effective for modifying Al based alloys, while
their combined effect may be limited by some Si-Sc interaction, which was rarely reported. In …

In this study, the effect of Sc addition on the grain refinement, modification of the eutectic Si,
mechanical and wear properties of A356 and A356–10 wt% TiB 2 in situ composite has …

Scandium is the best alloying element to improve the mechanical properties of industrial Al-
Si-Mg casting alloys. Most literature reports devote to exploring/designing optimal Sc …

Abstract The effect of Barium (Ba) addition (0, 0.05, 0.15, 0.5 wt. pct) on the microstructure
and mechanical properties of an Al-7Si alloy was studied. Differential scanning calorimetry …

Abstract In hypoeutectic Mg-Al-based alloys, Mg 17 Al 12 forms in the last stages of
solidification by a eutectic reaction that is usually fully or partially divorced. Here we …

The mechanical properties of hypoeutectic Al-Si foundry alloys are generally controlled by
their microstructures. The present study was performed to determine the influence of erbium …