Research on powder-based additive manufacturing of aluminium alloys is rapidly
increasing, and recent breakthroughs in printing of defect-free parts promise substantial …

Ultrasonic fatigue testing is a resourceful (time-and cost-saving) approach to assess the
dynamic failure of materials in the gigacycle range (ie, when the number of cycles to failure …

Axial loading fatigue tests with stress ratio of 0 were conducted in investigating the influence
of building directions (0°, 45° and 90°) on high cycle fatigue property of a selective laser …

Additive manufacturing (AM), which is a process of building objects in a layer‐upon‐layer
fashion from designed models, has received unprecedented attention from research and …

The recent attention towards additive manufacturing (AM) of metallic alloys, particularly Al-Si
alloys, has been significant due to its important role in the design and development of …

The fatigue life of metals can be generally divided into three stages: crack nucleation, small
crack growth up to about 2 mm, and large crack growth up to fracture. In additively …

Additive manufacturing (AM) of metals can be broadly accomplished via two defined
technologies: powder bed fusion and directed energy deposition. During AM fabrication, the …

The influence of the micronotch size on the small fatigue-crack behavior of CP-Ti was
investigated in this study. With an increase in the equivalent micronotch size, the fatigue life …

Additive manufacturing (AM) technology is undergoing rapid development as an advanced
technique for fabricating light-weight and complex-shape metallic parts with acceptable …

This study quantitatively investigates the influence of loading parameters and directions on
the behavior of small fatigue cracks (SFC) in commercially pure titanium (CP-Ti). It is …