Rheology, crystallinity, and mechanical investigation of interlayer adhesion strength by thermal annealing of polyetherimide (PEI/ULTEM 1010) parts produced by 3D …

M Yilmaz, NF Yilmaz, MF Kalkan - Journal of Materials Engineering and …, 2022 - Springer
Fused deposition modeling (FDM) is a 3D printing technology in which the melt extrusion
method is used for the production of thermoplastic parts. 3D printed thermoplastic materials …

Tribo-mechanical investigation of glass fiber reinforced polymer composites under dry conditions

C Birleanu, M Pustan, M Cioaza, P Bere, G Contiu… - Polymers, 2023 - mdpi.com
Tribo-mechanical experiments were performed on Glass Fiber Reinforced Polymer (GRFP)
composites against different engineering materials, and the tribological behavior of these …

Polymer composites based on polycarbonate (PC) applied to additive manufacturing using melted and extruded manufacturing (MEM) technology

K Bulanda, M Oleksy, R Oliwa, G Budzik… - Polymers, 2021 - mdpi.com
As part of the present work, polymer composites used in 3D printing technology, especially
in Melted and Extruded Manufacturing (MEM) technology, were obtained. The influence of …

Development of material extrusion 3D printable ABS/PC polymer blends: influence of styrene–isoprene–styrene copolymer on printability and mechanical properties

N Verma, SS Banerjee - Polymer-Plastics Technology and …, 2023 - Taylor & Francis
In this work, a series of 3D printable ABS/PC blends were successfully prepared via filament
extrusion and fused deposition fabrication. Influence of styrene–isoprene–styrene (SIS) …

Production readiness assessment of low cost, multi-material, polymeric 3D printed moulds

P Ferretti, GM Santi, C Leon-Cardenas, E Fusari… - Heliyon, 2022 - cell.com
Abstract Fused Deposition Modelling (FDM) technology allows to choose a large variety of
materials and it is widely used by companies and individuals nowadays. The cost …

Molds with advanced materials for carbon fiber manufacturing with 3D printing technology

P Ferretti, GM Santi, C Leon-Cardenas, M Freddi… - Polymers, 2021 - mdpi.com
Fused Deposition Modeling (FDM) 3D printing is the most widespread technology in additive
manufacturing worldwide that thanks to its low costs, finished component applications, and …

Monitoring Equipment Malfunctions in Composite Material Machining: Acoustic Emission-Based Approach for Abrasive Waterjet Cutting

IA Popan, C Cosma, AI Popan, VI Bocăneț, N Bâlc - Applied Sciences, 2024 - mdpi.com
This paper introduces an Acoustic Emission (AE)-based monitoring method designed for
supervising the Abrasive Waterjet Cutting (AWJC) process, with a specific focus on the …

New methodology for evaluating surface quality of experimental aerodynamic models manufactured by polymer jetting additive manufacturing

R Udroiu - Polymers, 2022 - mdpi.com
The additive manufacturing (AM) applications have attracted a great deal of interest with
regard to experimental aerodynamic studies. There is a need for a universal roughness …

Manufacture of thermoplastic molds by fused filament fabrication 3D printing for rapid prototyping of polyurethane foam molded products

G Guerrero-Vacas, J Gomez-Castillo… - Rapid Prototyping …, 2024 - emerald.com
Purpose Polyurethane (PUR) foam parts are traditionally manufactured using metallic
molds, an unsuitable approach for prototyping purposes. Thus, rapid tooling of disposable …

A set of novel procedures for carbon fiber reinforcement on complex curved surfaces using multi axis additive manufacturing

J Kipping, Z Kállai, T Schüppstuhl - Applied Sciences, 2022 - mdpi.com
There has been considerable research in recent years on the additive manufacturing (AM) of
carbon fiber reinforced polymer (CFRP) parts based on the process of fused deposition …