High modulus asphalt concrete (HMAC) was originally developed in France on the base
course to resist the plastic deformation with the increasing heavy traffic. Although these …

The available methods for accelerated ageing simulation in laboratory of compacted
bituminous mixtures are often not representative of the ageing mechanisms experienced in …

This study has investigated the fatigue and rutting performance of composite polyethylene
(PE) and polypropylene (PP) asphalt mixtures with the addition of nanosilica particles (NS) …

The fatigue life of an asphalt mix is defined as the number of load repetitions at which the
crack initiation phase ends and macro cracks start to grow (crack propagation/failure phase) …

The paper presents the design process and test results of warm mix asphalt concrete
produced with modified foamed bitumen and recycled synthetic fiber reinforcement …

The four-point beam (4PB) test is extensively used to characterize the fatigue behavior of
asphalt concrete mixtures. But the inhomogeneity of the deformation in the beam is not given …

Fatigue damage affects both durability and safety, and it has been the most important
distress in asphalt concrete. Fatigue damage occurs as a result of repeated traffic loading …

The paper deals with the processing of the data of the four point bending tests carried out for
determination of material properties. The tests are interpreted throughout the Bernoulli's …

In this study, the effects of 0.6, 0.8 and 1 wt ratio of limestone and silica fillers on the bitumen
fatigue life were investigated using different dissipated energy parameters. Pure bitumen …

Currently, no performance-related test exists for fatigue cracking for use in routine asphalt
mix design to approve job mix formula (JMF) and quality control and quality assurance …