This study explores the hot deformation behavior of Al–Zn–Mg–Cu alloy through uniaxial hot
compression (200° C–450° C) using the Gleeble-1500. True stress–strain curves were …

The hot formability of a near-β titanium alloy is studied near the β transus temperature to
determine the mechanisms of deformation. Compression tests of Ti-5Al-5Mo-5V-3Cr-1Zr are …

Hot compression tests of a novel dual-phase Mg–Li alloy were performed in temperature
range of 200–400° C and strain rate range of 0.01–10s− 1. 2D and 3D processing maps …

Physical processes that occur during hot compression tests performed on AISI1010 steel in
the temperature range of 750° C–1050° C and strain rates range of 0.01–20 s− 1 are …

An accurate constitutive model is imperative to describe the deformation behavior of
aluminum alloy in numerical simulation of thermal plastic forming process. In this study …

Abstract Al-Cu-Li alloy (AA2195) was produced using vacuum induction melting (VIM)
furnace under dynamic argon atmosphere. The as-cast billets were homogenized using a …

The hot deformation behavior of Co-Ni-Cr-W-based superalloy was investigated by means
of hot compression tests at the temperature range of 1000–1200° C with strain rate range of …

This encyclopedia, written by authoritative experts under the guidance of an international
panel of key researchers from academia, national laboratories, and industry, is a …

Constitutive flow behavior and hot workability of the powder metallurgy processed 20vol.%
SiCP/2024Al composite were investigated using hot compression tests. The modified …

Zr and its alloys are considered as strategic materials for nuclear industry. In nuclear
industries, zirconium and its alloys are mostly used to manufacture the tubes for reactors …