Additive manufacturing (AM) is a transformative technology that has rapidly grown over the
past decade. AM processes build parts layer by layer and have found applications in the …

Ultra-fast femtosecond (fs) lasers provide a unique technological opportunity to precisely
and efficiently micromachine materials with minimal thermal damage owing to the reduced …

Laser surface texturing is a relatively well-known technique for enhancing the surface
topography of engineering materials. Lately, several surface texturing approaches like …

In micro-ultrasonic machining (μUSM), slight lateral vibration at the end of the tool inevitably
occurs due to tool manufacturing installation errors and mechanical system vibrations …

Abstract Laser Surface Texturing (LST) is widely used to modify hard material surfaces
improving their physic-chemical and mechanical properties. This technology is particularly …

In this paper, a water assisted pulsed laser machining with mist spray was investigated for
machining the micro-structures on chemical vapor deposition (CVD) diamond coating tools …

An application of an ultra-short femto-second (fs) pulsed laser (30 fs, 800 nm, 1 kHz)
radiation under a simultaneously varied laser fluence (0.6, 1.2 and 1.8 J/cm 2) and number …

Tetragonal zirconia polycrystal-alumina (ZA) composite behaves differently from other
ceramics when stressed; it clogs the crack tip and eventually maintains its mechanical …

This work presents an energy-saving approach to the single-pass wire electrical discharge
machining (WEDM) of polycrystalline diamond with no degradation in edge geometry or …

In order to improve the tribological properties of Ti-6Al-4V alloy and further broaden the
application scope of titanium alloy materials in the industrial field, a preparation method of a …