Flake-shaped particles were fabricated from crushing ingots with ball milling method.
Scanning electron microscope (SEM), X-ray diffraction (XRD), vibrating samples …

The low strength of soft magnetic alloy limits the ability to operate high speed rotors in aero-
generators. Strengthening of soft magnetic alloys remains a challenge, as most methods that …

The crystallization kinetics of FeSiCr amorphous alloy, characterized by the crystallization
activation energy, Avrami exponent and frequency factor, was studied by non-isothermal …

Abstract The nanocrystalline Fe-Si-B-Cu-Nb alloys were prepared by firstly melt spinning
and then spark plasma sintering process. The microstructure and magnetic properties of the …

Abstract The Fe–Si–Cr alloy powders were successfully modified by using the phosphatizing
and sodium silicate coating processes. The optimized surface pre-treatment for Fe–Si–Cr …

The book aims to provide comprehensive and practical guidance on magnetism and
magnetic materials. It involves four parts, focusing on fundamental magnetism, hard …

FeSi10Cr10 powder was mechanically alloyed by high energy planetary ball milling, starting
from elemental powders. The microstructural and magnetic properties of the milled powders …

Magnetised soft ferromagnetic films with micrometer thicknesses can be used as π-flippers
in spin-echo small-angle neutron scattering instruments. An FeSi film with a total thickness of …

Magnetized soft ferromagnetic films with micrometer thickness can be used as π-flippers for
a spin echo small-angle neutron scattering (SESANS) instrument. Two FeSi monolayers and …

Magnetized soft ferromagnetic films with micrometer thickness were studied. A FeSi film, with
a total thickness of 2000 nm, separated by 10 nm-thick Ta interlayers, was fabricated using …