Numerical analysis of CZTS/n-Si solar cells using SCAPS-1D. A comparative study between experimental and calculated outputs
Abstract CZTS (Cu 2 ZnSnS 4) is a p-type semiconductor material which has been
intensively used as an absorbing layer for thin film solar cells. Using pulsed laser ablation+ …
intensively used as an absorbing layer for thin film solar cells. Using pulsed laser ablation+ …
A review of typical PLD arrangements: Challenges, awareness, and solutions
JMC Garrido, JM Silveyra - Optics and Lasers in Engineering, 2023 - Elsevier
Pulsed laser deposition (PLD) is a unique technique to synthesize thin films, in which a
target is ablated by scanning a laser beam throughout its surface. Over other methods, PLD …
target is ablated by scanning a laser beam throughout its surface. Over other methods, PLD …
Determination of photovoltaic parameters of CIGS hetero junction solar cells produced by PLD technique, using SCAPS simulation program
In this study, CIGS ultrathin films of 52 nm, 89 nm, 183 nm and 244 nm thicknesses were
grown on a n-Si substrate using PLD technique, then Ag/CIGS/Si/Al hetero-junction solar …
grown on a n-Si substrate using PLD technique, then Ag/CIGS/Si/Al hetero-junction solar …
Investigation of photocatalytic activity (under visible light) of ultrathin CZTS films produced in different thicknesses by PLD method
Abstract Cu2ZnSnS4 (CZTS) thin films in 61 nm, 112 nm, 242 nm and 313 nm thickness
which have been produced by Pulsed Laser Deposition (PLD) on Soda Lime Glass …
which have been produced by Pulsed Laser Deposition (PLD) on Soda Lime Glass …
[图书][B] Recent Advances in Thin Film Photovoltaics
UP Singh, NB Chaure - 2022 - Springer
The thin-film photovoltaic technology has shown a growing interest for quite some time.
These materials have to compete with well-established Si-wafer-based technology. Across …
These materials have to compete with well-established Si-wafer-based technology. Across …
Investigation of Novel n-Doped a-Si/CZTSe ultrathin-film solar cell for enhanced performance
The ultrathin-film solar cell (UTFSC) technology has recently intrigued researchers with
various chalcogenide materials, namely, copper indium gallium selenide (CIGS), copper …
various chalcogenide materials, namely, copper indium gallium selenide (CIGS), copper …
The effect of sodium (Na) doping on the performance of n-Si/Cu2SnS3 heterojunction solar cells deposited by PLD using a homemade target.
Abstract n-Si/Cu 2 SnS 3 (CTS) heterojunction solar cell has been fabricated in this work
using different doping concentration of Na into CTS thin films. The pure raw powders of …
using different doping concentration of Na into CTS thin films. The pure raw powders of …
Parameter extraction of high-performance material based organic light-emitting transistors (olets)
As per industry requirement and environment conditions, the devices which made from the
organic materials are chosen at present owing to their low-cost, light weight, mechanically …
organic materials are chosen at present owing to their low-cost, light weight, mechanically …
[PDF][PDF] Thickness variation effects on the efficiency of simulated hybrid Cu2ZnSnS4-based solar cells using SCAPS-1D
This study presents the simulations of a hybrid Cu2ZnSnS4-based solar cell with a planar
heterojunction structure in a hybrid model (n-FTO/n-ZnO/p-PSCS/p-CZTS/p-PSCS/p-HTM) …
heterojunction structure in a hybrid model (n-FTO/n-ZnO/p-PSCS/p-CZTS/p-PSCS/p-HTM) …
[HTML][HTML] Efficiency enhancement of CZTS solar cell with WO3 buffer layer using CZTSe BSF layer
Abstract Non-toxic, low-cost, and bandgap-direct material Copper Zinc Tin Sulphide (CZTS)
is a promising candidate thin film solar cell. As the effort to improve the efficiency of the …
is a promising candidate thin film solar cell. As the effort to improve the efficiency of the …