[HTML][HTML] Microwave liquid crystal enabling technology for electronically steerable antennas in SATCOM and 5G millimeter-wave systems
R Jakoby, A Gaebler, C Weickhmann - Crystals, 2020 - mdpi.com
Future satellite platforms and 5G millimeter wave systems require Electronically Steerable
Antennas (ESAs), which can be enabled by Microwave Liquid Crystal (MLC) technology …
Antennas (ESAs), which can be enabled by Microwave Liquid Crystal (MLC) technology …
Supporting and enabling circuits for antenna arrays in wireless communications
ASY Poon, M Taghivand - Proceedings of the IEEE, 2012 - ieeexplore.ieee.org
Antenna arrays have been demonstrated as a very promising technique for high-speed
wireless networks, and are anticipated to be indispensable components in future wireless …
wireless networks, and are anticipated to be indispensable components in future wireless …
The evolution to modern phased array architectures
JS Herd, MD Conway - Proceedings of the IEEE, 2015 - ieeexplore.ieee.org
Phased array technology has been evolving steadily with advances in solid-state microwave
integrated circuits, analysis and design tools, and reliable fabrication practices. With …
integrated circuits, analysis and design tools, and reliable fabrication practices. With …
60-GHz 64-and 256-elements wafer-scale phased-array transmitters using full-reticle and subreticle stitching techniques
This paper presents 60-GHz wafer-scale transmit phased arrays with 64-and 256-elements
spaced λ/2 apart in the x-and y-directions, and occupying an area of 21.4× 22 mm 2 (471 …
spaced λ/2 apart in the x-and y-directions, and occupying an area of 21.4× 22 mm 2 (471 …
A 22–44-GHz phased-array receive beamformer in 45-nm CMOS SOI for 5G applications with 3–3.6-dB NF
This article presents a 22-44-GHz phased-array receive beamformer in the GlobalFoundries
(GF) 45-nm CMOS SOI. The channel includes a wideband single-ended to differential low …
(GF) 45-nm CMOS SOI. The channel includes a wideband single-ended to differential low …
A 25–30 GHz fully-connected hybrid beamforming receiver for MIMO communication
This paper presents a “fully-connected” hybrid beamforming receiver that independently
weights each element in an antenna array prior to separate downconversion chains that …
weights each element in an antenna array prior to separate downconversion chains that …
60-GHz 5-bit phase shifter with integrated VGA phase-error compensation
WT Li, YC Chiang, JH Tsai, HY Yang… - IEEE Transactions …, 2013 - ieeexplore.ieee.org
A 57-64-GHz low phase-error 5-bit switch-type phase shifter integrated with a low phase-
variation variable gain amplifier (VGA) is implemented through TSMC 90-nm CMOS low …
variation variable gain amplifier (VGA) is implemented through TSMC 90-nm CMOS low …
A 5G 28-GHz common-leg T/R front-end in 45-nm CMOS SOI with 3.7-dB NF and− 30-dBc EVM with 64-QAM/500-MBaud modulation
This paper presents a 28-GHz common-leg phased-array front-end in 45-nm CMOS silicon
on insulator with transmit and receive capabilities. The design alternates cascode amplifiers …
on insulator with transmit and receive capabilities. The design alternates cascode amplifiers …
A reconfigurable 28-/37-GHz MMSE-adaptive hybrid-beamforming receiver for carrier aggregation and multi-standard MIMO communication
S Mondal, J Paramesh - IEEE Journal of Solid-State Circuits, 2019 - ieeexplore.ieee.org
This paper presents a multi-standard fully connected hybrid beamforming (FC-HBF) receiver
that can be reconfigured between two fully connected two-stream multi-input-multi-output …
that can be reconfigured between two fully connected two-stream multi-input-multi-output …
The search for a reliable MEMS switch
The RF community has long been searching for the ideal switch since the birth of
electronics, and it is defined as a device having virtually no insertion loss (Ron= 0 Ω) over a …
electronics, and it is defined as a device having virtually no insertion loss (Ron= 0 Ω) over a …