Analysis and design of a 260-MHz RF bandwidth+ 22-dBm OOB-IIP3 mixer-first receiver with third-order current-mode filtering TIA

G Pini, D Manstretta, R Castello - IEEE Journal of Solid-State …, 2020 - ieeexplore.ieee.org
The design of a mixer-first wideband receiver with RF bandwidth of 260 MHz suitable for 5G
applications below 6 GHz is presented. The transimpedance amplifier immediately following …

Low-power high-linearity mixer-first receiver using implicit capacitive stacking with 3× voltage gain

VK Purushothaman, EAM Klumperink… - IEEE journal of solid …, 2021 - ieeexplore.ieee.org
In this article, we present a passive mixer-first receiver front end providing a low-power
integrated solution for high interference robustness in radios targeting Internet-of-Things …

Harmonic-Resilient Fully Passive Mixer-First Receiver for Software-Defined Radios

S Araei, S Mohin, N Reiskarimian - IEEE Journal of Solid-State …, 2023 - ieeexplore.ieee.org
This article presents a low-loss fully passive harmonic rejection (HR) and blocker-tolerant
mixer-first receiver (RX) for 5G new radio (NR) applications. This design exploits the …

A 0.6–1.8-mW 3.4-dB NF mixer-first receiver with an N-path harmonic-rejection transformer-mixer

S Weinreich, B Murmann - IEEE Journal of Solid-State Circuits, 2022 - ieeexplore.ieee.org
This article presents a low-power passive mixer-first receiver (MFRX) with an N-path
harmonic-rejection (HR) transformer-mixer for narrowband Internet-of-Everything (IoE) …

Multifunction, multiband, and multimode wireless receivers: A path toward the future

J Moghaddasi, K Wu - IEEE Microwave Magazine, 2020 - ieeexplore.ieee.org
Emerging and disruptive information and communication technology (ICT) R&D is principally
driven by the growing needs of signal generation, collection, transmission, processing, and …

A mixer-first receiver frontend with resistive-feedback baseband achieving 200 MHz IF bandwidth in 65 nm CMOS

B Guo, H Wang, Y Wang, K Li, L Li… - 2022 IEEE Radio …, 2022 - ieeexplore.ieee.org
A mixer-first receiver frontend with resistive-feedback baseband is proposed. The baseband
combination of G m and transimpedance amplifier (TIA) is designed to cover a wide …

A Reflection-Mode N-Path Filter Tunable From 6 to 31 GHz

S Hari, CJ Ellington, BA Floyd - IEEE Journal of Solid-State …, 2023 - ieeexplore.ieee.org
A 6-to-31-GHz reflection-mode-path filter is implemented in 45-nm SOI technology. The filter
includes an on-chip hybrid coupler with through and coupled ports terminated with four …

A 1.7–3.6 GHz 20 MHz-Bandwidth Channel-Selection N-Path Passive-LNA Using a Switched-Capacitor-Transformer Network Achieving 23.5 dBm OB-IIP₃ and 3.4 …

H Shao, G Qi, PI Mak, RP Martins - IEEE Journal of Solid-State …, 2021 - ieeexplore.ieee.org
This article reports a channel-selection N-path passive low-noise amplifier (pLNA) featuring
only switches, capacitors, and a step-up transformer (ie a SCT network) to build a highly …

An enhanced mixer-first receiver with distortion cancellation, achieving 80-dB/decade RF selectivity and+ 8-dBm B1dB for adjacent channel blockers

S Krishnamurthy, AM Niknejad - IEEE Solid-State Circuits …, 2021 - ieeexplore.ieee.org
An enhanced N-path filter-based receiver with 80-dB/decade RF selectivity and distortion
cancellation is presented to improve channel selectivity and resilience to adjacent channel …

Breaking the performance tradeoffs in N-path mixer-first receivers using a second-order baseband noise-canceling TIA

PK Sharma, N Nallam - IEEE Journal of Solid-State Circuits, 2020 - ieeexplore.ieee.org
Input-match, noise figure (NF), in-band (IB) third-order input-referred intercept point (IIP3),
out-of-band (OB) IIP3, and power consumption are five crucial performance metrics of a …