The development of pseudocapacitor electrodes and devices with high active mass loading
Pseudocapacitive materials are used for supercapacitor applications due to their
exceptionally high capacitance and low cost. Good capacitive performance of the …
exceptionally high capacitance and low cost. Good capacitive performance of the …
Commercial-level mass-loading MnO 2 with ion diffusion channels for high-performance aqueous energy storage devices
Transition metal oxides have shown renewed interest as promising electrode materials for
high-performance electrochemical energy storage devices. However, their cycle stability …
high-performance electrochemical energy storage devices. However, their cycle stability …
Asymmetric supercapacitor, based on composite MnO2-graphene and N-doped activated carbon coated carbon nanotube electrodes
Manganese dioxide nanotubes and activated carbon coated multiwalled carbon nanotubes
(AC-MWCNT) are prepared by hydrothermal methods. MnO 2-graphene positive electrodes …
(AC-MWCNT) are prepared by hydrothermal methods. MnO 2-graphene positive electrodes …
Electrochemical supercapacitor based on multiferroic BiMn2O5
Y Liu, I Zhitomirsky - Journal of Power Sources, 2015 - Elsevier
Submicrometre particles of multiferroic BiMn 2 O 5 are prepared by a hydrothermal method.
We demonstrate for the first time that BiMn 2 O 5-multiwalled carbon nanotube (MWCNT) …
We demonstrate for the first time that BiMn 2 O 5-multiwalled carbon nanotube (MWCNT) …
Application of murexide as a capping agent for fabrication of magnetite anodes for supercapacitors: experimental and first-principle studies
C Boucher, D Tang, I Zhitomirsky, O Rubel - Journal of Materials Science, 2024 - Springer
In this study, we investigate the effectiveness of murexide for surface modification of Fe 3 O 4
nanoparticles to enhance the performance of multiwalled carbon nanotube-Fe 3 O 4 …
nanoparticles to enhance the performance of multiwalled carbon nanotube-Fe 3 O 4 …
Manganese dioxide–carbon nanotube composite electrodes with high active mass loading for electrochemical supercapacitors
MnO 2–multiwalled carbon nanotube (MWCNT) composites were prepared for application in
supercapacitor electrodes and devices. Good dispersion and mixing of the individual …
supercapacitor electrodes and devices. Good dispersion and mixing of the individual …
Heteroaggregation of multiwalled carbon nanotubes and zinc sulfide nanoparticles
LK Sarpong, M Bredol, M Schönhoff - Carbon, 2017 - Elsevier
In this work, the heteroaggregation kinetics between positively and negatively charged
variants of multiwalled CNTs with positively charged zinc sulfide (ZnS) nanoparticles was …
variants of multiwalled CNTs with positively charged zinc sulfide (ZnS) nanoparticles was …
Facile Route for Fabrication of Ferrimagnetic Mn3O4 Spinel Material for Supercapacitors with Enhanced Capacitance
W Yang, M Nawwar, I Zhitomirsky - Energies, 2022 - mdpi.com
The purpose of this investigation was the development of a new colloidal route for the
fabrication of Mn3O4 electrodes for supercapacitors with enhanced charge storage …
fabrication of Mn3O4 electrodes for supercapacitors with enhanced charge storage …
Synthesis of metal and metal oxide nanoparticles, liquid–liquid extraction and application in supercapacitors
C Wallar, T Zhang, K Shi, I Zhitomirsky - Colloids and Surfaces A …, 2016 - Elsevier
Abstract Suspensions of Ag and MnO 2 nanoparticles in n-butanol were prepared by
synthesis in aqueous solutions and liquid–liquid extraction to the n-butanol phase. Lauryl …
synthesis in aqueous solutions and liquid–liquid extraction to the n-butanol phase. Lauryl …
Hetero-assembly of colloidal particles in concentrated non-aqueous suspensions by polymer dispersant design
Although many colloidal assembling systems have been reported, most systems suffer from
severe aggregation under high solid concentrations, which can often be observed in typical …
severe aggregation under high solid concentrations, which can often be observed in typical …