Based on the extensive new experimental results, a yield criterion is proposed to describe
the anisotropic yield behavior and tension compression asymmetry characteristics of an …

The high-temperature anisotropy and microstructure evolution mechanisms of the rolled
TA32 titanium alloy sheet were studied. The hot deformation behaviors of the TA32 sheet …

Abstract Laser-welded Ti-6Al-4 V is prone to severe residual stresses, microstructural
variation, and structural defects which are known detrimental to the mechanical properties of …

Plastic anisotropy of ultrafine-grained (UFG) Cu–30% Zn tubes fabricated by parallel tubular
channel angular pressing (PTCAP) process was investigated. The results showed that there …

Abstract The multilayered Brass/IFS/Brass composite was produced through the cold roll
bonding (CRB) process and was then subjected to annealing treatments at different …

The accurate characterization of the anisotropic thermal-mechanical constitutive properties
of structural sheet metals at elevated temperatures and under nonuniform stress/strain states …

This paper investigates the effect of quenching and aging treatment on microstructure and
abrasive wear of Ti-6Al-4V alloy. The as-received alloy was solution treated at 1339 K, then …

In this study, a novel approach was taken to investigate plastic anisotropy in coarse-grained
(CG) and ultra-fine grained (UFG) AA 5083 aluminium tubes. For this purpose, a parallel …

Texture is inevitably generated during the rolling process of titanium alloys, which has a
significant impact on mechanical properties. The relationship between microstructure …

In this study, a novel severe plastic deformation technique referred to as rotational
constrained bending (RCB) is introduced. A special constrained bending die, which imposes …