In this work, we fabricated a multifunctional membrane by in-situ growth of tetrakis (4-
carboxyphenyl) porphyrin-doped UiO-66-NH 2 on stainless steel mesh (SSM), denoted as …

Membrane separation has been widely used for oil-in-water separation, but the fouling of oil
droplets on the membrane surface is still a challenge. Coating a photocatalyst layer on the …

In this paper, we evaluated the potential of two synthesized bio-based polyurethane foams,
PU1 and PU2, for the removal of diesel and gasoline from water mixtures. We started the …

Hydrogel, a common hydrophilic material, is often used in wastewater treatment. In order to
expand the application of hydrogel in superhydrophilic coatings, we chose acrylic acid (AA) …

In this paper, fluorosilsesquioxanes (F-SQs) were first synthesized by hydrolysis
condensation of (3, 3, 3-trifluoropropyl) trimethoxysilane. Then, F-SQs were blended with …

Oil agents produced from the degreasing treatment of synthetic fibers are typical pollutants
in wastewater from printing and dyeing, which may cause large-scale environmental …

To increase oil sorption, polyurethane foams were modified with MoS2, ZnO grafting and/or
hexadecanoic acid coating. The foams were characterized by Scanning Electron …

This study investigates the incorporation of algae-based activated carbon into polyurethane
foam to improve a biocomposite for gasoil sorption. The biocomposites were thoroughly …

Diesel oil contamination is a threat to environment and human health. Many technologies
have been developed to address this issue; however, they are costly to be deployed in real …

Deterioration of water quality has become a global concern and water recycling has become
a major challenge. In order to expand the multifunctional use of polyethyleneimine (PEI), PEI …