Solidification/stabilization is accepted as a well-established disposal technique for
hazardous waste. As a result many different types of hazardous wastes are treated with …

In the past few decades, solidification/stabilization (S/S) technology has been put forward for
the purpose of improving soil strength and inhibiting contaminant migration in the …

Wastewater treatment sludge from a primary lead-zinc smelter is characterized as
hazardous waste and requires treatment prior to disposal due to its significant arsenic and …

The metals speciation in all sludge samples from the different Wastewater Treatment Plants
(WWTPs) indicated that, Mn, Ni and Zn were most abundant in the exchangeable, carbonate …

This is the second article in a two‐part review of the current state of the science regarding
hexavalent chromium. Part 1 discussed chromium health effects, regulations, and analysis …

Chromium typically occurs in two oxidation states in the natural environment, water
treatment processes and water distribution systems: trivalent chromium (chromium-3, Cr (III) …

This research studied the influence of individual heavy metal on the hydration reactions of
major cement clinker phases in order to investigate the performance of cement based …

Industrial wastes, such as steel slag and desulfurized gypsum, are piled up in large
quantities and only a very small portion is recycled, adversely impacting natural ecosystems …

This study focuses on the stabilisation/solidification (S/S) treatment of air pollution control
(APC) residues from municipal solid waste (MSW) incineration. Six formulations (T1–T6) …

The analytical literature about chromium speciation in solid samples has been surveyed.
From 451 articles published on the speciation of chromium from 1983 to 1997, the …