Magnesium is the lightest constructional metal, which makes it an important material for
different applications like automotive, transportation, aviation and aerospace. There are …

Magnesium being the lightest structural material, is being increasingly used in automotive
industry but at elevated temperatures, alloys like AZ91D, AM60B, AM50A etc. exhibit poor …

While materials that are light, strong, tough and simultaneously damping are highly attractive
for a range of applications, it remains a challenge to achieve a combination of all these …

The mechanical properties and corrosion behaviour of AZ91 magnesium alloy containing
0.2–0.5 wt.% Ti were investigated in this study. Results demonstrate that the enhancement …

Cracking at phase or grain boundaries has been demonstrated as the dominant failure
mode in Mg alloys, emphasizing the necessity for boundary enhancement to improve both …

The present investigation is conducted on microstructure engineering of a Mg–8Al-0.5 Zn
(AZ80) alloy by different processing routes including conventional aging, cold rolling …

Mg–4Al–xCe–0.3 Mn (x= 0, 1, 2, 4 and 6wt.%) alloys were prepared by high-pressure die-
casting. The microstructures, mechanical properties and corrosion behavior were …

Herein, the effect of heat treatment and pre-straining on dynamic precipitation and creep
properties of an extruded AZ91-0.5 Y magnesium alloy is systematically investigated. Four …

In this study, effect of Sn addition on microstructure, mechanical and the casting properties of
AZ91 magnesium alloy have been studied. Results from the microstructural analysis showed …

In this study, the recycled short carbon fiber (CF)-reinforced magnesium matrix composites
were fabricated using a combination of stir casting and hot extrusion. The objective was to …