Study of mechanism, microstructure and mechanical properties of activated flux TIG welded P91 Steel-P22 steel dissimilar metal joint

A Kulkarni, DK Dwivedi, M Vasudevan - Materials Science and …, 2018 - Elsevier
The current work investigates activated flux TIG welding of dissimilar steel combination of 8
mm thick plates of Modified 9Cr-1Mo (P91) steel and 2.25 Cr-1Mo (P22) steel. The effect of …

Mechanical, microstructure, and corrosion characterization of dissimilar austenitic 316L and duplex 2205 stainless-steel ATIG welded joints

K Touileb, AC Hedhibi, R Djoudjou, A Ouis… - Materials, 2022 - mdpi.com
The present work analyzed the microstructure, mechanical, and corrosion properties of a
dissimilar activated tungsten inert gas (ATIG) welded 2205 duplex stainless-steel (2205 …

Influence of Ni and PWHT on microstructure evolution and mechanical properties of GTA-welded duplex stainless steel and super duplex stainless steel joints: A …

M Abbasi, BB Vanani, A Tahaei… - Proceedings of the …, 2024 - journals.sagepub.com
In the present investigation, a new endeavor has been made to analyze the impact of the
secondary process (post-weld heat treatment (PWHT)) as well as Ni addition on the …

Microstructural characterization and mechanical properties of K-TIG welded SAF2205/AISI316L dissimilar joint

Z Fei, Z Pan, D Cuiuri, H Li, S Van Duin, Z Yu - Journal of Manufacturing …, 2019 - Elsevier
Motivated by increasing productivity and cost-effectiveness, the feasibility of Keyhole
Tungsten Inert Gas (K-TIG) welding for joining SAF2205/AISI316L dissimilar materials was …

Characterization of microstructure, mechanical and corrosion response in AISI 304L and Ti-stabilized 439 stainless steels weld joints

SK Gupta, AP Patil, RC Rathod, V Tandon… - Journal of Manufacturing …, 2023 - Elsevier
The gas tungsten arc welding (GTAW) was employed to weld dissimilar materials of 304L
austenitic stainless steel (ASS) and Ti-stabilized 439 ferritic stainless steel (FSS). Dissimilar …

Effect of fillers and autogenous welding on dissimilar welded 316L austenitic and 430 ferritic stainless steels

C Tembhurkar, R Kataria, S Ambade, J Verma… - Journal of Materials …, 2021 - Springer
This experimental study examines the effects of dissimilar welding of 316L austenitic and
430 ferritic stainless steels, welded with gas tungsten arc welding process with (ER316L and …

The Role of Nitrogen Gas and PWHT on Pitting Corrosion Behavior of Duplex Stainless-Steel Joint Made by GTAW

A Tahaei, M Abbasi, BB Vanani, F Zanotto… - Metallography …, 2024 - Springer
The influence of nitrogen gas and post-weld heat treatment (PWHT) on microstructure and
pitting corrosion behaviors of duplex stainless steel welds were investigated. After gas …

Electron backscattered diffraction analysis across the welded interface of post weld heat treated 2205 duplex stainless-steel and 316L austenitic stainless-steel …

A Gupta, KK Verma, R Kumar, CS Perugu… - Journal of Materials …, 2023 - Springer
In the present work, the effect of post weld heat treatment (PWHT) on the microstructure and
micro-texture evolution in 316L austenitic stainless steel (ASS)/2205 duplex stainless steel …

Influence of filler variation on microstructural evolution, mechanical and corrosion performance of Ti-stabilized 439 ferritic stainless steel

SK Gupta, AP Patil, RC Rathod, V Tandon… - Materials Today …, 2023 - Elsevier
In the present study, gas tungsten arc welding (GTAW) was used for the joining of Ti-
stabilized 439 ferritic stainless steel (FSS) with different austenitic stainless steels (ASSs) …

Shielded metal arc welding of UNS S32750 steel: microstructure, mechanical properties and corrosion behaviour

TR Dandekar, A Gupta, A Kumar… - Materials Research …, 2018 - iopscience.iop.org
In the present investigation, ER2594 (conventional) and ER2595 (consisting of additional
Cu and W) electrodes were used to produce butt joints of 5.5 mm thick super duplex …