Determination of fatigue life for low probability of failure for different stress levels using 3-parameter Weibull distribution
P Strzelecki - International Journal of Fatigue, 2021 - Elsevier
This paper presents proposed characteristics of the SN curve using the 2 and 3-parameter
Weibull distribution for fatigue limit and limited life respectively. The parameters of the …
Weibull distribution for fatigue limit and limited life respectively. The parameters of the …
Effect of surface stress concentration control and surface material strengthening on the fatigue performance of shot-peened single-crystal superalloy
X Wang, C Xu, A Zhai, M Liu, X Huang, K Tian… - Journal of Alloys and …, 2023 - Elsevier
This study analyzes the effect of shot peening on the surface integrity of nickel-based single
crystal superalloys (SX) and the evolution of stress concentration factors caused by surface …
crystal superalloys (SX) and the evolution of stress concentration factors caused by surface …
Fatigue life for different stress concentration factors for stainless steel 1.4301
This paper presents the results of the static tensile and fatigue life tests under rotating
bending of round 1.4301 (AISI 304) steel samples. The fatigue tests were carried out on …
bending of round 1.4301 (AISI 304) steel samples. The fatigue tests were carried out on …
Effect of the stress concentration factor on the final fracture zone of aluminium AW 6063 T6 for rotating bending specimens
P Strzelecki, M Wachowski - Materials Today Communications, 2022 - Elsevier
The paper presents fracture surfaces of the polycrystalline material-AW 6063 T6 aluminium
alloy-under a rotating bending load. The fatigue fracture surfaces were analysed for high …
alloy-under a rotating bending load. The fatigue fracture surfaces were analysed for high …
Estimation of fatigue SN curves for aluminium based on tensile strength–proposed method
P Strzelecki, JA Correia… - MATEC Web of …, 2021 - matec-conferences.org
The paper presents its own proposition of an analytical method for determining the SN
characteristic for aluminium material. The method is based on the value of the slope …
characteristic for aluminium material. The method is based on the value of the slope …
[PDF][PDF] Determination of the Region of no Effect of the Notch on Fatigue Life of AA2519 T62 Aluminium Alloy
M Kotyk, P Strzelecki - Advances in Science and Technology …, 2024 - researchgate.net
The paper presents a fatigue test of AA2519 T62 aluminium alloy in high-cycles region for
smooth and notched specimens with stress concentration factors 1.75 and 2.28 for radii r1 …
smooth and notched specimens with stress concentration factors 1.75 and 2.28 for radii r1 …
Comparison of different methods to estimate parameters of the Weibull distribution for fatigue strength
P Strzelecki - AIP Conference Proceedings, 2023 - pubs.aip.org
The normal distribution is widely used in fatigue calculations of the strength or life of
construction components. However, it is not recommended to use for calculations for …
construction components. However, it is not recommended to use for calculations for …
Effects of Temperature on the Fatigue Characteristics of the Bond Zone between the Al-12Si/ABOw Composites and Al-12Si Alloys
G Chen, W Zhang, Y Xu, Y Zhang - Journal of Materials Engineering and …, 2023 - Springer
The fatigue characteristics of the bond zone between the aluminum borate whiskers-
reinforced aluminum matrix (Al-12Si/ABOw) composites and Al-12Si matrix alloys were …
reinforced aluminum matrix (Al-12Si/ABOw) composites and Al-12Si matrix alloys were …