Influence of the nose radius on the machining forces induced during AISI-4140 hard turning: A CAD-based and 3D FEM approach
A Tzotzis, C García-Hernández, JL Huertas-Talón… - Micromachines, 2020 - mdpi.com
The present study investigated the performance of three ceramic inserts in terms of the micro-
geometry (nose radius and cutting edge type) with the aid of a 3D finite element (FE) model …
geometry (nose radius and cutting edge type) with the aid of a 3D finite element (FE) model …
Cad-based 3d-fe modelling of aisi-d3 turning with ceramic tooling
In this study, the development of a 3D Finite Element (FE) model for the turning of AISI-D3
with ceramic tooling is presented, with respect to four levels of cutting speed, feed, and …
with ceramic tooling is presented, with respect to four levels of cutting speed, feed, and …
One-shot drilling process for thin CFRP/Aluminium alloys stacks
M Panico, M Durante, A Langella… - Materials and …, 2024 - Taylor & Francis
The aerospace industry pursues lighter, stronger, and more fuel-efficient aircraft, relying on
lightweight materials. This study investigates one-shot drilling of thin hybrid stacks, including …
lightweight materials. This study investigates one-shot drilling of thin hybrid stacks, including …
3D-FEM approach of AISI-52100 hard turning: modelling of cutting forces and cutting condition optimization
In the present study, a 3D finite element (FE) model for machining AISI-52100 steel was
proposed, with respect to three levels of cutting speed (100 m/min, 150 m/min and 200 …
proposed, with respect to three levels of cutting speed (100 m/min, 150 m/min and 200 …
Performance evaluation and testing methods of clinched joint
Y Lu, H Wen, C Chen - The International Journal of Advanced …, 2024 - Springer
Vehicle lightweighting is a current focus of research in the automotive industry, aiming to
reduce vehicle weight, improve fuel economy, and reduce tailpipe emissions. One …
reduce vehicle weight, improve fuel economy, and reduce tailpipe emissions. One …
A Study for improved prediction of the cutting force and chip shrinkage coefficient during the SKD11 alloy steel milling
This study proposed an innovative method for improving the prediction of the cutting force
(F) and chip shrinkage coefficient (K) for milling of SKD11 alloy steels using simulations and …
(F) and chip shrinkage coefficient (K) for milling of SKD11 alloy steels using simulations and …
3D FE Modelling of Machining Forces during AISI 4140 Hard Turning.
A Tzotzis, C Garcia-Hernandez… - Journal of …, 2020 - search.ebscohost.com
Hard turning is one of the most used machining processes in industrial applications. This
paper researches critical aspects that influence the machining process of AISI 4140 to …
paper researches critical aspects that influence the machining process of AISI 4140 to …
Residual compressive stress prediction determined by cutting-edge radius and feed rate during milling of thin-walled parts
X Jiang, Y Cai, W Liu, M Guo, H Zhou, Z Xu… - … International Journal of …, 2023 - Springer
Residual compressive stress can effectively improve fatigue the life of aerospace thin-walled
parts. In this study, residual compressive stress control is taken as the target. Firstly, a …
parts. In this study, residual compressive stress control is taken as the target. Firstly, a …
Finite element simulation and regression modeling of machining attributes on turning AISI 304 stainless steel
A Mathivanan, MP Sudeshkumar… - Manufacturing …, 2021 - mfr.edp-open.org
To-date, the usage of finite element analysis (FEA) in the area of machining operations has
demonstrated to be efficient to investigate the machining processes. The simulated results …
demonstrated to be efficient to investigate the machining processes. The simulated results …
[HTML][HTML] Multivariate modelling of AA6082-T6 drilling performance using RSM, ANN and response optimization
The AA6082-T6 was experimentally studied in the present research with respect to the
drilling performance. Drill diameter, cutting speed and feed rate were examined, using a full …
drilling performance. Drill diameter, cutting speed and feed rate were examined, using a full …