A comprehensive review on liquid–liquid two-phase flow in microchannel: Flow pattern and mass transfer
Liquid–liquid two-phase flow in microchannel is very common in micro-chemical and micro-
biological system, etc. Deep understanding of the liquid–liquid two-phase flow mechanisms …
biological system, etc. Deep understanding of the liquid–liquid two-phase flow mechanisms …
Liquid film thickness of two‐phase slug flows in capillary microchannels: A review paper
Two‐phase Taylor flow has received considerable attention from researchers in recent
decades due to its potential use in a wide variety of industrial and medical applications. A …
decades due to its potential use in a wide variety of industrial and medical applications. A …
Utilization of milli-scale coiled flow inverter in combination with phase separator for continuous flow liquid–liquid extraction processes
Process-design intensification situated under the umbrella of Novel Process Windows heads
for process integration and here most development is needed for flow separators. The vision …
for process integration and here most development is needed for flow separators. The vision …
Dimensionless analysis on liquid-liquid flow patterns and scaling law on slug hydrodynamics in cross-junction microchannels
Liquid-liquid flow patterns and slug hydrodynamics were experimentally studied in non-
circular glass microchannels with water-butanol, water-toluene, water–oil and water-hexane …
circular glass microchannels with water-butanol, water-toluene, water–oil and water-hexane …
A review on the hydrodynamics of the liquid–liquid two-phase flow in the microchannels
The ability of small and microchannels to enhance mass transfer, reduce diffusional
limitations, and create a safer process has made them the best choice for process …
limitations, and create a safer process has made them the best choice for process …
Liquid–liquid two-phase flow patterns in Y-junction microchannels
M Darekar, KK Singh, S Mukhopadhyay… - Industrial & …, 2017 - ACS Publications
Experiments are carried out to study liquid–liquid two-phase flow patterns in Y-junction
microchannels etched in glass chips. The liquid–liquid test systems used in the experiments …
microchannels etched in glass chips. The liquid–liquid test systems used in the experiments …
Flow patterns and slug scaling of liquid-liquid flow in square microchannels
Liquid-liquid flow regimes in three square microchannels were visualized simultaneously
both at the cross-shaped junction and in the microchannel “far” from the junction in order to …
both at the cross-shaped junction and in the microchannel “far” from the junction in order to …
Comparison of liquid-liquid extraction in batch systems and micro-channels
Liquid-liquid extraction is an important mass transfer operation in the chemical, food
processing and pharmaceutical industries. Our work focuses on experimentally quantifying …
processing and pharmaceutical industries. Our work focuses on experimentally quantifying …
Experimental and numerical studies of liquid-liquid slug flows in micro channels with Y-junction inlets
L Lei, Y Zhao, X Wang, G Xin, J Zhang - Chemical Engineering Science, 2022 - Elsevier
The immiscible liquid-liquid two-phase flows in microchannels with 4 different inlet angles
(30°, 60°, 90°, 120°) were analyzed using numerical and experimental methods. Silicone oil …
(30°, 60°, 90°, 120°) were analyzed using numerical and experimental methods. Silicone oil …
Hydrodynamics of aqueous two-phase systems (ATPS) in millichannels
Abstract Aqueous Two-Phase Systems (ATPS) have been recently employed for purification,
concentration, synthesis, and separation of biomaterials and nanomaterials. Depending on …
concentration, synthesis, and separation of biomaterials and nanomaterials. Depending on …