Influence of pH and temperature parameters on the sol-gel synthesis process of meso porous ZrC nanopowder
In this study, Zirconium carbide nanopowders were synthesized by the sol-gel method in the
alcoholic system. Zirconium propoxide and phenolic resin were used as precursors of Zr and …
alcoholic system. Zirconium propoxide and phenolic resin were used as precursors of Zr and …
[HTML][HTML] Evaluation of APC impact on controlling precursors properties in the sol for synthesizing meso porous ZrC nanopowder through sol-gel process
In this research, the dispersion characteristics of the suspension containing precursors were
investigated in terms of charge, particle size, and rheological properties. Zirconium carbide …
investigated in terms of charge, particle size, and rheological properties. Zirconium carbide …
Openmouthed β-SiC hollow-sphere with highly photocatalytic activity for reduction of CO2 with H2O
Y Wang, L Zhang, X Zhang, Z Zhang, Y Tong… - Applied Catalysis B …, 2017 - Elsevier
A novel hollow spherical 3D structure of β-SiC with an open mouth was successfully
fabricated by an environmentally friendly approach starting from ethylsilicate interaction with …
fabricated by an environmentally friendly approach starting from ethylsilicate interaction with …
Synthesis of embedded ZrC-SiC-C microspheres via carbothermal reduction for thermal stability and electromagnetic wave absorption
K Zhao, F Ye, L Cheng, R Liu, J Liang, X Li - Applied Surface Science, 2022 - Elsevier
Abstract Development of a novel material with electromagnetic wave (EMW) absorbing
capability and high-temperature resistance is a definite trend. As an ultra-high temperature …
capability and high-temperature resistance is a definite trend. As an ultra-high temperature …
FTIR spectroscopy of ZrC nanoparticles under the gamma radiation
EM Huseynov - Spectrochimica Acta Part A: Molecular and …, 2023 - Elsevier
In the presented work, infrared spectra of nano-ZrC samples were taken in the range of 400–
4000 cm− 1 of the wavenumbers before and after gamma irradiation (5 Mrad, 15 Mrad, 50 …
4000 cm− 1 of the wavenumbers before and after gamma irradiation (5 Mrad, 15 Mrad, 50 …
The microstructural and mechanical behavior of in-situ synthesized ZrB2–ZrC and ZrB2–SiC–ZrC composites: A comparative study
In the present investigation, the ZrB 2–ZrC and ZrB 2–SiC–ZrC based composites were
fabricated via an in-situ reduction mechanism using ZrO 2, B 4 C, Si, and graphite fine …
fabricated via an in-situ reduction mechanism using ZrO 2, B 4 C, Si, and graphite fine …
[PDF][PDF] Effect of ZrC–SiC content on microstructure and ablation properties of C/C composites
J Li, X Yang, Z Su, L Xue, P Zhong, S Li… - … . Nonferrous Met. Soc …, 2016 - tnmsc.csu.edu.cn
C/C− ZrC− SiC composites with different ZrC− SiC contents were fabricated by precursor
infiltration and pyrolysis. The effect of ceramic content on the microstructure and ablation …
infiltration and pyrolysis. The effect of ceramic content on the microstructure and ablation …
Polymer precursor synthesis of novel ZrC–SiC ultrahigh-temperature ceramics and modulation of their molecular structure
S Wu, K Song, F Shi, J Wang, S Hu, G Zhao - Ceramics International, 2023 - Elsevier
Abstract In this study, ZrC–SiC composite ceramics were prepared with varying Zr/Si molar
ratios using sol–gel method. Composites were characterized by Fourier-transform infrared …
ratios using sol–gel method. Composites were characterized by Fourier-transform infrared …
Residual stress and fracture strength of brazed joint of ceramic and titanium alloy with the aid of laser deposited functionally graded material layers
To improve the strength of a ceramic (ZrC-SiC) and a titanium alloy (TC4) brazed joint, laser
deposited functionally graded material layers (FGM layers) between ZrC-SiC and TC4 were …
deposited functionally graded material layers (FGM layers) between ZrC-SiC and TC4 were …
ZrB2–SiC–G Composite Prepared by Spark Plasma Sintering of In‐Situ Synthesized ZrB2–SiC–C Composite Powders
YH Cheng, Y Qi, P Hu, S Zhou, G Chen… - Journal of the …, 2016 - Wiley Online Library
To avoid introduction of milling media during ball‐milling process and ensure uniform
distribution of SiC and graphite in ZrB2 matrix, ultrafine ZrB2–SiC–C composite powders …
distribution of SiC and graphite in ZrB2 matrix, ultrafine ZrB2–SiC–C composite powders …