Specific storage, which represents the aquifer's capacity to release water from or take into
storage when water level changes, is an important aquifer property required for transient …

Quantifying and representing uncertainty for geothermal systems is often ignored, in
practice, during the exploration phase of a geothermal development project. We propose …

Accurate and precise values of hydrodynamic parameters are needed for groundwater
modeling and management. Pumping test in the aquifer is the standard method to estimate …

Fractured rocks have presented formidable challenges for accurately predicting
groundwater flow and contaminant transport. This is mainly due to our difficulty in mapping …

This paper investigates optimal sampling times of drawdowns for the analysis of hydraulic
tomography (HT) survey. The investigation was carried out by analyzing the spatial and …

In sparse fracture systems flow and transport patterns are often dominated by main
flowpaths and characterized by a strong complexity induced by the fractures' surface …

Deep geological disposal is internationally accepted as a feasible and safe approach for
high-level radioactive waste (HLW) disposal. To evaluate hydrogeological conditions in …

Abstract Between 2005 and 2010, Japan Atomic Energy Agency conducted four long-term,
independent pumping tests in a fractured granite formation at the Mizunami Underground …

This paper investigates the importance of geological data in Hydraulic Tomography (HT)
through sandbox experiments. In particular, four groundwater models with homogeneous …

Hydraulic tomography (HT) has emerged as a potentially viable method for mapping
fractures in geologic media as demonstrated by recent studies. However, most of the studies …