LVI has become a serious threat to the composite industry because it induces complex
failure mechanisms and internal damages which significantly reduce the structural …

Composite laminate has extensive usage in the aerospace and automotive industries. Thus
delamination, one of its most prevalent and challenging failure modes, has attracted …

Aerospace composite structures are subjected to not only single but also repeated low-
velocity impact during service conditions. In this paper, the dynamic mechanical response …

Commercialization of solid oxide cells (SOCs) is hindered by their poor durability. In
particular, electrode–electrolyte delamination due to the mismatch in thermal expansion …

This manuscript offers a comprehensive review of the state of art on the machining induced
damage modelling of long fibre reinforced polymers (LFRP), focusing on the two most …

Adhesive bonding as an assembly procedure in aviation products is very efficient from both
weight and recurring cost points of view. However, even with strict inspections, process …

Cohesive zone model (CZM) has gained considerable attention to investigate the fracture
mechanism of asphalt mixture. The parameter of CZM was generally determined through …

A theoretical solution is aimed to be developed in this research for predicting the failure in
internally pressurized composite pressure vessels exposed to low-velocity impact. Both in …

This paper studies the ability of the fuselage's lower lobe to absorb the energy during a
crash landing, where the introduction of the composite materials can improve the crash …

Fracture toughness, ie, GC, is considered an important fracture characteristic parameter by
which the state of integrity of the adhesively bonded joints under different loading modes …