A review of the fabrication methods and mechanical behavior of continuous thermoplastic polymer fiber–thermoplastic polymer matrix composites
Y Qiao, LD Fring, MR Pallaka… - Polymer …, 2023 - Wiley Online Library
Thermoplastic polymer fiber–thermoplastic polymer matrix composites (PPCs or PRFPs),
often recognized as self‐reinforced or single polymer composites, are potential candidates …
often recognized as self‐reinforced or single polymer composites, are potential candidates …
A review on the recent applications of synthetic biopolymers in 3D printing for biomedical applications
AP RG, G Bajaj, AE John, S Chandran… - Journal of Materials …, 2023 - Springer
Abstract 3D printing technology is an emerging method that gained extensive attention from
researchers worldwide, especially in the health and medical fields. Biopolymers are an …
researchers worldwide, especially in the health and medical fields. Biopolymers are an …
Loading rate effect on the shear behavior of the carbon fiber/epoxy interface
K Yan, X Cao, X Xie, H Mei, J Tang, X Sun… - Composites Science and …, 2024 - Elsevier
Abstract Carbon fiber (CF)/epoxy (EP) composites are widely used in structural components.
Quasistatic and dynamic shear experiments were designed and conducted to investigate the …
Quasistatic and dynamic shear experiments were designed and conducted to investigate the …
[HTML][HTML] Effects of processing temperature, pressure, and fiber volume fraction on mechanical and morphological behaviors of fully-recyclable uni-directional …
This work explores a type of composite called thermoplastic polymer-fiber-reinforced
polymers (PFRPs), often referred to as self-reinforced composites (SRCs). A representative …
polymers (PFRPs), often referred to as self-reinforced composites (SRCs). A representative …
Effects of processing variables of extrusion–pultrusion method on the impregnation quality of thermoplastic composite filaments
Carbon fibre-reinforced polypropylene composite filaments were fabricated via the extrusion–
pultrusion method. One of the important factors influencing composites' filament …
pultrusion method. One of the important factors influencing composites' filament …
Experimental and numerical damage analysis of low-velocity drop weight impact of polyethylene self-reinforced composite laminates for transportation applications
S Chandran Maniyamparambil… - Journal of …, 2023 - journals.sagepub.com
This study covers a low-velocity impact property analysis of Polyethylene self-reinforced
composites (PET-HDPE/HDPE SRC) through experimental and numerical methods …
composites (PET-HDPE/HDPE SRC) through experimental and numerical methods …
Creep behaviour of ozone treated jute fabric/epoxy composites filled with ozonized and pulverized corn husk particles
D Bhattacharyya, V Baheti - Materials Chemistry and Physics, 2023 - Elsevier
In present work, the creep performance of ozone treated jute fabric/epoxy composites was
studied at different environment temperatures after incorporation of 1, 3 and 5 wt% of …
studied at different environment temperatures after incorporation of 1, 3 and 5 wt% of …
Creep behaviour of ozone treated jute fabric/epoxy composites
D Bhattacharyya, V Baheti - Journal of Composite Materials, 2023 - journals.sagepub.com
The present work attempted to study the creep behaviour of jute fabric/epoxy composites at
different environment temperatures using several creep models (ie, Burger's model …
different environment temperatures using several creep models (ie, Burger's model …
The Influence of Residual Stresses on the Curve Shape—Describing Interface Behavior in “Polymer–Fiber” Systems
YA Gorbatkina, VG Ivanova-Mumzhieva, OV Alexeeva… - Polymers, 2024 - mdpi.com
The pull-out method was used to study the adhesive strength τ of “fiber–thermoset” systems
with wide variations in area. Studied binders were based on resins that had different …
with wide variations in area. Studied binders were based on resins that had different …
The Influence of Fiber Treatment and Matrix Type on the Impregnation Quality of Carbon Fiber Reinforced Thermoplastics
C Budiyantoro, H Sosiati, KA Syahputra… - Semesta …, 2023 - journal.umy.ac.id
One of the main issues with Carbon Fiber Reinforced Thermoplastics (CFRTP) is the poor
impregnation quality of the matrix on carbon fiber due to the high viscosity of the …
impregnation quality of the matrix on carbon fiber due to the high viscosity of the …