Intrinsically stretchable low-dimensional conductors for wearable organic light-emitting diodes
Advances in wearable electronics have resulted in an increasing demand for stretchable
conductors, which can serve as either interconnects or electrodes for intrinsically stretchable …
conductors, which can serve as either interconnects or electrodes for intrinsically stretchable …
Improvement of the thermoelectric performance of InSe-based alloys doped with Sn
X Hou, S Chen, Z Du, X Liu, J Cui - RSC advances, 2015 - pubs.rsc.org
Here we present InSe-based alloys InSeSnx (x= 0–0.02) with improved thermoelectric
performance upon Sn's preferential occupation on In lattice sites. This improvement is …
performance upon Sn's preferential occupation on In lattice sites. This improvement is …
Influence of unintentional H2O introduction in sputtering chamber on ITO films and HJT solar cells
M Wang, G Wang, M Hu, L Zhao, X Xu, J Xiao… - Solar Energy Materials …, 2023 - Elsevier
In this study, we investigated the effect of H 2 O partial pressure on the chemical
characteristic and optoelectrical properties of the indium tin oxide (ITO) films and the …
characteristic and optoelectrical properties of the indium tin oxide (ITO) films and the …
Highly ultraviolet transparent textured indium tin oxide thin films and the application in light emitting diodes
Z Chen, Y Zhuo, W Tu, X Ma, Y Pei, C Wang… - Applied Physics …, 2017 - pubs.aip.org
Various kinds of materials have been developed as transparent conductors for applications
in semiconductor optoelectronic devices. However, there is a bottleneck that transparent …
in semiconductor optoelectronic devices. However, there is a bottleneck that transparent …
Comparative study of amorphous indium tin oxide prepared by pulsed-DC and unbalanced RF magnetron sputtering at low power and low temperature conditions for …
Comparative study of indium tin oxide (ITO) was performed between films prepared by
pulsed direct current (PDC) and radio frequency (RF) magnetron sputtering methods at low …
pulsed direct current (PDC) and radio frequency (RF) magnetron sputtering methods at low …
Development and utility of a new 3-D magnetron source for high rate deposition of highly conductive ITO thin films near room temperature
L Wen, BB Sahu, JG Han - Physical Chemistry Chemical Physics, 2018 - pubs.rsc.org
As transparent conductive films, indium tin oxide (ITO) materials are being extensively used
as electrodes in various technological and optoelectronic applications. The demand for ITO …
as electrodes in various technological and optoelectronic applications. The demand for ITO …
Effects of the interfacial charge injection properties of silver nanowire transparent conductive electrodes on the performance of organic light-emitting diodes
JH Kim, RE Triambulo, JW Park - Journal of Applied Physics, 2017 - pubs.aip.org
We investigated the charge injection properties of silver nanowire networks (AgNWs) in a
composite-like structure with poly (2, 3-dihydrothieno-1, 4-dioxin)-poly (styrenesulfonate) …
composite-like structure with poly (2, 3-dihydrothieno-1, 4-dioxin)-poly (styrenesulfonate) …
In-Sn oxide bilayer transparent conductive film by dc magnetron sputtering for silicon heterojunction solar cells
H Li, S Yin, G Dong, G Cui, M Chen… - IEEE Journal of …, 2021 - ieeexplore.ieee.org
The optical and electrical properties of the front transparent conductive film of a
heterojunction with intrinsic thin-layer solar cell are the key factors that determine the …
heterojunction with intrinsic thin-layer solar cell are the key factors that determine the …
Influence of discharge power and annealing temperature on the properties of indium tin oxide thin films prepared by pulsed-DC magnetron sputtering
Indium tin oxide (ITO) films, prepared by a pulsed direct current magnetron sputtering
system, are investigated at powers from 0.4 to 2.0 kW (power density in the range 0.8–4.1 …
system, are investigated at powers from 0.4 to 2.0 kW (power density in the range 0.8–4.1 …
Effects of hole injection layer on performance of green OLEDs based on flexible ITO
Z Yang, C Cheng, X Pan, F Pan, F Wang, M Tian… - Materials Chemistry and …, 2020 - Elsevier
Abstract Hybrid 1, 4, 5, 8, 9, 11-hexaazatriphenylene-hexacarbonitrile (HAT-CN)/molydium
oxide (MoO 3) is employed as hole injection layer (HIL) to modify the flexible ITO anode in …
oxide (MoO 3) is employed as hole injection layer (HIL) to modify the flexible ITO anode in …