Numerical thermomechanical modelling of solid oxide fuel cells

M Peksen - Progress in Energy and Combustion Science, 2015 - Elsevier
Over the last decade, many computational models have been presented to describe the
complex thermomechanical behaviour of solid oxide fuel cells. The present study elucidates …

Experimental investigation of temperature distribution over a planar solid oxide fuel cell

O Razbani, I Wærnhus, M Assadi - Applied energy, 2013 - Elsevier
Temperature distribution over a Solid oxide fuel cell (SOFC) surface is a crucial parameter
for design of a SOFC stack. The selection of both materials and the operating point of a stack …

Numerical simulation and analysis of thermal stress distributions for a planar solid oxide fuel cell stack with external manifold structure

C Wang, J jun Yang, W Huang, T Zhang, D Yan… - International journal of …, 2018 - Elsevier
A three-dimensional numerical model based on the finite element method (FEM) is
constructed to calculate the thermal stress distribution in a planar solid oxide fuel cell …

Comparison of humidified hydrogen and partly pre-reformed natural gas as fuel for solid oxide fuel cells applying computational fluid dynamics

M Andersson, H Nakajima, T Kitahara… - International Journal of …, 2014 - Elsevier
A three-dimensional computational fluid dynamics (CFD) approach based on the finite
element method (FEM) is used to investigate a solid oxide fuel cell (SOFC). Governing …

A pressurized ammonia-fed planar anode-supported solid oxide fuel cell at 1–5 atm and 750–850 C and its loaded short stability test

YT Hung, SS Shy - International Journal of Hydrogen Energy, 2020 - Elsevier
Ammonia is a useful energy carrier for solid oxide fuel cell (SOFC) with advantages over
hydrogen. Understanding of the performance and stability of ammonia-fed SOFC operated …

Optimization study of the produced electric power by SOFCs

Y Sahli, HB Moussa, B Zitouni - International Journal of Hydrogen Energy, 2019 - Elsevier
In this work, an optimization study of the delivered power density by the solid oxide fuel cells
is presented according to a thermodynamic model. The power density is defined by the …

Experimental investigations of cell resistances to characterize the concentration polarization behavior of 10× 10 cm2 solid oxide fuel cells

J Zhang, L Lei, H Li, K Sun, Z Sun, M Han - Journal of Power Sources, 2021 - Elsevier
High fuel utilization rate is the basis for solid oxide fuel cells (SOFCs) to achieve high power
generation efficiency. However, the severe concentration polarization, namely limiting …

A comprehensive comparison of performances of anode-supported, cathode-supported, and electrolyte-supported solid oxide fuel cells during warming-up process

M Hami, J Mahmoudimehr - International Journal of Heat and Mass …, 2024 - Elsevier
Although the influence of supporting layer features on the steady performance of solid oxide
fuel cells (SOFCs) has been discussed in previous studies, the literature shows a lack of …

Solid oxide fuel cell thermodynamic study

Y Sahli, B Zitouni, H Ben-Moussa - Çankaya University Journal of …, 2017 - dergipark.org.tr
The aim of this work is the solid oxide fuel cell (SOFC) thermodynamic study. Particular
attention is given to the electric power optimization. The Nernst potential and the over …

Thermal field in SOFC fed by hydrogen: Inlet gases temperature effect

H Djamel, A Hafsia, Z Bariza, BM Hocine… - International journal of …, 2013 - Elsevier
In the present work, the effect of the hydrogen and the air temperature values on the
temperature distribution in a Planar Solid Oxide Fuel Cell is studied by the aid of a two …