The damage to a metal is significantly enhanced when simultaneously exposed to a
corrosive solution and a cyclic mechanical stress. However, decoupling the contributions …

Plastic deformation is an important factor affecting the critical condition of hydrogen-induced
delayed cracking (HIDC) of quenching and partitioning (Q&P) steels. The study established …

The local corrosion behaviour and the mechanism of a low-Sn bronze alloy segregation
area were studied. The results showed that segregation has a higher Sn content but a lower …

An innovative local dry underwater double pulsed MIG (LDU-DPMIG) technique was
successfully applied to fabricate SUS304 weld seams, in which the stirring effect on the …

In this work, a non-steady electrochemical model for assessing stress corrosion cracking
(SCC) of 2205 duplex stainless steel (DSS) under applied polarization potentials was …

The AA2219/304SS bars are inertia friction welded. Research demonstrated high heat input
can promote the precipitation of the strengthening phases to form the Cu-rich layer. Whereas …

Abstract The Fe-Cr-B alloy coatings, fabricated through both high deposition rate and
conventional laser-directed energy deposition processes (H-LDED and LDED), have found …

The corrosion behavior of 2507 super duplex stainless steel (SDSS) in H2S-free and H2S-
containing acidic environments was investigated. In N2 environment, the dissolution of Fe …

In this study, the relationship between the microstructural evolution, electrochemical
behavior, and passivation capability in Fe 68 Ni 10 Mn 10 Co 10 Ti 1.5 Si 0.5 medium …

Welds made with 304 austenitic stainless steel play an important role in high-pressure
hydrogen storage systems. However, there are few investigations of the effect of heat input …