Strain gradient plasticity phenomenon in surface treated plain carbon steel
Surface engineering is essential for materials being used for functional and structural
applications. There have been various approaches and mechanisms used for improving …
applications. There have been various approaches and mechanisms used for improving …
Robust macroscale superlubricity on carbon-coated metallic surfaces
This paper discusses experimental and computational results of ultralow (near-zero) friction
of carbon-coated metallic depositions on substrates of structural steels, Ti, and Ni alloys. The …
of carbon-coated metallic depositions on substrates of structural steels, Ti, and Ni alloys. The …
[HTML][HTML] Surface hardening of ferrous materials with cassava (Manihot spp.) waste: A review
This paper presents a comprehensive review on surface hardening of ferrous materials
using in-situ diffusion of nascent carbon and nitrogen from cyanide-based bio-processed …
using in-situ diffusion of nascent carbon and nitrogen from cyanide-based bio-processed …
Experimental study to investigate microstructure and continuous strain rate sensitivity of structural steel weld zone using nanoindentation
NV Nguyen, SE Kim - International Journal of Mechanical Sciences, 2020 - Elsevier
In this study, a series of experiments consisting of continuous stiffness measurement (CSM)
nanoindentation experiments, optical microscope (OM), atomic force microscopy (AFM) …
nanoindentation experiments, optical microscope (OM), atomic force microscopy (AFM) …
Strain rate-dependent behaviors of mechanical properties of structural steel investigated using indentation and finite element analysis
In this study, a series of experiments, which consist of constant strain rate indentation, and
optical microscope examination, and finite element analysis were performed to investigate …
optical microscope examination, and finite element analysis were performed to investigate …
Strain rate sensitivity behavior of a structural steel during low-cycle fatigue investigated using indentation
In this study, a series of experiments consisting of low-cycle fatigue, constant loading rate
indentation, creep indentation experiments, optical microscopy examination, and …
indentation, creep indentation experiments, optical microscopy examination, and …
Microstructure and strain rate sensitivity behavior of SM490 structural steel weld zone investigated using indentation
In this study, a series of optical microscope examinations, constant loading rate indentation
(CLR), and creep indentation (CI) tests were performed on room temperature to investigate …
(CLR), and creep indentation (CI) tests were performed on room temperature to investigate …
Revealing the anisotropy mechanisms of mechanical properties and wear resistance in hot-extruded titanium-silicon brass
X Wang, M Gao, Y Li, J Jie, S Liu, H Dong… - Materials Science and …, 2024 - Elsevier
Hot extrusion, a process to eliminate casting defects and regulate microstructure, is an
industrial commonly used approach for preparing synchronizer rings. In this present study …
industrial commonly used approach for preparing synchronizer rings. In this present study …
[HTML][HTML] Effect of indentation load on nanomechanical properties measured in a multiphase boride layer
P Dziarski, N Makuch - Materials, 2021 - mdpi.com
The study investigated the dependence of the indentation load on nanomechanical
properties for a gas-borided layer produced on Inconel 600-alloy. During the measurements …
properties for a gas-borided layer produced on Inconel 600-alloy. During the measurements …
Sliding wear characteristics of pack cyanided ductile iron
In this paper, ductile iron was produced using a rotary furnace. The microstructures of the
ductile iron (with and without cyanided coatings) were then characterized using optical …
ductile iron (with and without cyanided coatings) were then characterized using optical …