Since the discovery of MgB 2 as a superconductor, several research groups worldwide have
studied the superconducting mechanisms due to the dual gap nature of MgB 2, as well as …

Abstract Effect of wire diameter and annealing on the properties of internal magnesium
diffusion (IMD)-processed MgB 2 composite wires is studied by establishing a correlation …

This note presents a superconducting joint technique for the development of MgB 2
magnetic resonance imaging (MRI) magnets. The MgB 2 superconducting joint was …

This study presents the investigation of superconducting joints fabricated using multifilament
magnesium diboride (MgB 2) wires for the development of persistent-current mode magnetic …

We investigated the influence of reactivity of commonly used sheath materials (Fe, SS, Cu,
and Ni) with Mg/B, processed by in situ powder in sealed tube method on superconducting …

The powder-in-tube technique has been used to fabricate Cu-sheathed magnesium diboride
(MgB 2) wires using an in situ reaction method. The effects of high heating rate, short …

Abstract Bulk (MgB 2) 0.96 Ni 0.04 samples doping with premilled Ni powders were sintered
at 750° C for 30 min. During sintering, liquid Mg–Ni phase prompts solid–solid reaction …

Ni nanoparticles were successfully introduced for preparing polycrystalline MgB 2 samples
by a novel reduction method. According to transmission electron microscopy, the obtained …

Current transfer length (CTL) and current sharing with the normal paths for a metal sheathed
MgB 2 superconductor are studied by analytical and numerical methods. The study was …

The present study focuses on the preparation of good quality MgB2 superconductor in bulk,
wire/tape forms and on the improvement of in-field critical current density [JC (H)]. MgB2 bulk …