Structural properties of Zn-Fe alloy coatings and their corrosion resistance
Single-layer and multilayer alloy deposits were coated onto a mild steel substrate by a
single-bath electroplating process. The developed coating consists of Zn and Fe alloys …
single-bath electroplating process. The developed coating consists of Zn and Fe alloys …
Surface structure and electrochemical behavior of Zinc-Nickel anti-corrosive coating
RS Bhat, K Venkatakrishna… - Analytical and …, 2023 - abechem.com
We report on the electrodeposition of a zinc-nickel alloy using a sulphate bath on mild steel
(MS) substrate. The Hull cell experiment was used to optimize the bath composition and …
(MS) substrate. The Hull cell experiment was used to optimize the bath composition and …
Electroplating of Zn-Ni alloy coating on mild steel and its electrochemical studies
A new sulfate bath having ZnSO 4. 6H 2 O, NiSO 4. 6H 2 O, citric acid, and methanol extract
in combination was optimized for the deposition of Zn-Ni electroplating on mild steel. The …
in combination was optimized for the deposition of Zn-Ni electroplating on mild steel. The …
[HTML][HTML] The effect of porosity on strain evolution and failure of soldered, small-diameter, thin-walled metallic pipes
Small-diameter, thin-walled pipes have applications in a wide range of industries including
high-energy physics, heat transfer, nuclear, medical and communications. There are no …
high-energy physics, heat transfer, nuclear, medical and communications. There are no …
Electrodeposition and corrosion performance of Ni-Co alloys with different cobalt contents
Y Chen, H Yang, H Feng, P Yang, J Zhang… - Materials Today …, 2023 - Elsevier
The deposition mechanism of Ni-Co alloys with different cobalt compositions plays an
important role in the preparation and application of Ni-Co alloys by electrodeposition. Cyclic …
important role in the preparation and application of Ni-Co alloys by electrodeposition. Cyclic …
Zn–Ni compositionally modulated multilayered alloy coatings for improved corrosion resistance
Zinc–Nickel monolayer (single layer) and compositionally modulated multilayer alloy
coatings were developed on to mild steel from acidic sulphate bath; and their corrosion …
coatings were developed on to mild steel from acidic sulphate bath; and their corrosion …
Compositionally modulated multilayered Zn-Co deposits for better corrosion resistance
Zn-Co compositionally modulated multilayer alloy (CMMA) deposits have been developed
onto mild steel using single bath technique. Multilayer alloy coatings have been …
onto mild steel using single bath technique. Multilayer alloy coatings have been …
Investigation of the corrosion-preventing properties of nickel-coated austenitic stainless steel (AISI 304) in NaOH and NaOH+ 10% NaCl solutions
H Ramdane, N Benaioun, N Moulayat… - Inorganic Chemistry …, 2023 - Elsevier
The nickel electrodeposition coating onto a stainless steel AISI 304 substrate was performed
in a sulfate–chloride bath using cyclic voltammetry, chronoamperometry, and linear scan …
in a sulfate–chloride bath using cyclic voltammetry, chronoamperometry, and linear scan …
Fabrication of Ni-microstructure through electrochemical deposition using 3D printed solution flow type microdroplet cell
Electrochemical 3D printing of electrical conductors with microscale fabrication grasps large
capacities for future industrial applications. Low-cost, and eco-friendly electrochemical …
capacities for future industrial applications. Low-cost, and eco-friendly electrochemical …
[PDF][PDF] Prediction and optimization of microhardness and corrosion behaviour of CuNi–Gr composite coatings
Graphene nanoplatelets (Gr) as fillers for alloy composite coatings has increased due to
their remarkable high aspect ratio and distinctive plate-like structure. Piping, condensers …
their remarkable high aspect ratio and distinctive plate-like structure. Piping, condensers …