The automobile industry is presently focusing on processing of advanced steels with
superior strength–ductility combination and lesser weight as compared to conventional high …

Automobile industry is continuously striving to obtain light body-in-white structures to meet
tightened regulations on flue-gas emissions/crash-testing parameters.'Advanced high …

In this study, artificial neural network (ANN) and multi-objective genetic algorithm (GA) are
employed in tandem to design dual-phase (DP) steel with improved performance. Six …

Conventional dual phase (DP) steel (0.08 C–0.81 Si–1.47 Mn–0.03 Al wt.%) was
manufactured using simulated strip casting schedule in laboratory. The average grain size of …

In this paper micromechanical behavior of ferrite and martensite microphases was evaluated
by means of comprehensive micro-nanohardness measurements supplemented by light and …

The microstructure and hardness of case-hardened steel were investigated after carburizing
and austenitizing at 820− 900° C, and oil quenching and tempering at 180° C. The …

Friction tests between a ferrite-martensite dual phase steel, with different martensite volume
fractions (48–98%), and an abrasive paper with different sizes (15–200 µm) under various …

The super combination of ultrahigh strength and good ductility is in high demand for the gear
steels. Here we improved the mechanical properties of a micro-alloyed gear steel through …

The state of the art industrial manufacturing process to produce shafts as counter surfaces
for radial shaft seal rings is plunge grinding. This process consists of three major steps. The …

In this work an investigation was conducted into the cold deformation ageing susceptibility of
a carbon steel and a microalloyed steel, both with dual phase micro-structure. Ageing …