NdFeB permanent magnets have different life cycles, depending on the applications: from as
short as 2–3 years in consumer electronics to 20–30 years in wind turbines. The size of the …

Due to the high potential of Zirconium and Zr-based alloys regarding corrosion it is of
interest to develop even better Zr-based alloys as well as to improve the understanding of …

Isotropic nanocrystalline Nd14Fe80B6 and Nd12Dy2Fe73. 2Co6. 6Ga0. 6B5. 6 magnets
with different grain sizes in the range of 60–600 nm have been produced from melt-spun …

We investigate the magnetic properties and thermal stability of Tb-diffused Nd–Fe–B
magnets prepared at various grain-boundary diffusion temperatures and additional heat …

In this work, the effects of temperature and chloride ion concentration were evaluated for the
corrosion behavior of Cu–Al composite plates exposed to salt spray. There were three …

The corrosion resistance and microstructure of anisotropic Nd-Fe-B magnet prepared by
spark plasma sintering (SPS) technique were studied. The SPS Nd-Fe-B has displayed …

The current paper presents the corrosion characteristics of two permanent magnetic alloys,
Nd–Fe–B and SmCo5 in the acidic environments. The results revealed that the corrosion …

The anisotropic corrosion behaviour of highly textured sintered Nd–Fe–B magnets in weakly
acidic solutions has been evaluated by investigations of magnet surfaces, which are parallel …

The corrosion behavior of hot-pressed nanocrystalline NdFeB magnet in a NaCl-induced
atmosphere with relative humidity of 80% was investigated using SEM/EDS and XPS …

In this work, it is shown a comparative analysis of magnetic measurements that has been
done over rapidly quenched melt-spinning alloyed ribbons with the formula Nd y Fe (86− y …