Plasma surface modification of metallic biomaterials
Plasma surface modification is a versatile and economic surface-modification technique that
alters the functionality of biomaterials. This chapter explores the many methods that …
alters the functionality of biomaterials. This chapter explores the many methods that …
Fabrication and characterization of HAp/Al2O3 composite coating on titanium substrate
ZC Wang, YJ Ni, JC Huang - 2008 2nd International …, 2008 - ieeexplore.ieee.org
HAp/Al 2 O 3 composite coating was fabricated onto micro-arc oxidized titanium substrate
using a combination of electrophoretic deposition and reaction bonding process. SEM, EDS …
using a combination of electrophoretic deposition and reaction bonding process. SEM, EDS …
Effect of yttria-doping on mechanical properties of bovine hydroxyapatite (BHA)
Sintered bodies of hydroxyapatite, derived from calcinated bovine bone (BHA) and doped
with 0.5 and 1 wt% Y2O3, were prepared. Measurements of density, compression strength …
with 0.5 and 1 wt% Y2O3, were prepared. Measurements of density, compression strength …
Effect of highly dispersed yttria addition on thermal stability of hydroxyapatite
P Parente, B Savoini, B Ferrari, MA Monge… - Materials Science and …, 2013 - Elsevier
The capability of the colloidal method to produce yttria (Y2O3) dispersed hydroxyapatite
(HA) has been investigated as an alternative method to the conventional method of …
(HA) has been investigated as an alternative method to the conventional method of …
The influence of bond-coating on plasma sprayed alumina-titania, doped with biologically derived hydroxyapatite, on stainless steel
The influence of bond-coating on the quality of thin coatings (∼ 100 µm) of alumina-titania
(60%–40%), doped with 5% and 10% bovine hydroxyapatite, plasma-spayed on stainless …
(60%–40%), doped with 5% and 10% bovine hydroxyapatite, plasma-spayed on stainless …
[引用][C] Preparation of HAp/Al2O3 Functionally Gradient Coating on Titanium by a Combination of Electrophoretic Deposition and Reaction Bonding Process
ZC Wang, YJ Ni - ECS Meeting Abstracts, 2008 - iopscience.iop.org
Titanium and its alloys are widely used for dental and orthopedic implants, because of their
high mechanical properties, chemical stability, and biocompatibility. Due to its poor …
high mechanical properties, chemical stability, and biocompatibility. Due to its poor …