Evaluation and remediation techniques for barite sagging: a review
S Adjei, S Elkaktatny, YA Sokama-Neuyam… - Geoenergy Science and …, 2023 - Elsevier
Heavy-weight materials such as barite (BaSO 4) is used in mud formulations to increase
density. In deeper formations where a higher hydrostatic pressure of the mud column is …
density. In deeper formations where a higher hydrostatic pressure of the mud column is …
Improving the performance of invert emulsion drilling fluid using boron nitride and graphene nanoplatelets for drilling of unconventional high-temperature shale …
Drilling in deep unconventional shale formations is one of the most complex and
challenging tasks. The success of the drilling operation in these formations is greatly reliant …
challenging tasks. The success of the drilling operation in these formations is greatly reliant …
Developing an efficient ester-based drilling fluid based on Calophyllum Inophyllum oil for eco-friendly drilling of unconventional shale formation
The ester-based drilling fluids has been emerged as an alternative to diesel and mineral oil-
based drilling fluids and are preferred due to their high biodegradability and low toxicity. In …
based drilling fluids and are preferred due to their high biodegradability and low toxicity. In …
[HTML][HTML] Evaluating the influence of graphene nanoplatelets on the performance of invert emulsion drilling fluid in high-temperature wells
The oil-based mud is preferred to drill highly technical and challenging formations due to its
superior performance. However, the inadequate chemical and thermal stability of …
superior performance. However, the inadequate chemical and thermal stability of …
Effect of particle number density on rheological properties and barite sag in oil-based drilling fluids
TN Ofei, B Lund, A Saasen - Journal of Petroleum Science and Engineering, 2021 - Elsevier
The effect of barite particle mass fraction and of particle size distribution on the settling and
sag potential in oil-based drilling fluid samples is investigated for four fluids with densities of …
sag potential in oil-based drilling fluid samples is investigated for four fluids with densities of …
Use of a polymer gel for killing a high-temperature and high-pressure gas well
Y Bai, C Liu, J Sun, K Lv - SPE Journal, 2022 - onepetro.org
In the processes of oil and gas drilling, gas easily invades wellbores and adversely
influences the safety in high-pressure gas reservoir drilling activities. In this study, a polymer …
influences the safety in high-pressure gas reservoir drilling activities. In this study, a polymer …
The effect of oil–water ratio on rheological properties and sag stability of oil-based drilling fluids
TN Ofei, B Lund, A Saasen… - Journal of Energy …, 2022 - asmedigitalcollection.asme.org
Drilling fluids for oilfield use consist of complex mixtures of natural and synthetic materials.
The viscous properties along with the particle size distribution of the applied weight …
The viscous properties along with the particle size distribution of the applied weight …
Development and performance evaluation of castor oil based biodiesel as an eco-friendly ester-based drilling fluid
This study focuses on developing an efficient and environment-friendly drilling fluid using
biodiesel as an alternative to the conventional diesel-based drilling fluid for drilling highly …
biodiesel as an alternative to the conventional diesel-based drilling fluid for drilling highly …
[HTML][HTML] Rheology assessment and barite sag in a typical North Sea oil-based drilling fluid at HPHT conditions
TN Ofei, E Ngouamba, N Opedal, B Lund… - Korea-Australia …, 2023 - Springer
The occurrence of barite sag in drilling fluids has relatively often been the cause for gas
kicks in oilwell drilling. The subsequent absorption of gas into drilling fluid could lower the …
kicks in oilwell drilling. The subsequent absorption of gas into drilling fluid could lower the …
Rheological and viscoelastic property characterizations of amino acid-based hydraulic fracturing fluids
In this paper, we present the results of the rheometric properties of a guar-based fracturing
fluid containing amino-acid clay stabilizers. Four amino acids, glycine, proline, alanine, and …
fluid containing amino-acid clay stabilizers. Four amino acids, glycine, proline, alanine, and …