Effect of critical plasma spray parameters on the microstructure, microhardness and wear and corrosion resistance of plasma sprayed alumina coatings

ST Aruna, N Balaji, J Shedthi, VKW Grips - Surface and Coatings …, 2012 - Elsevier
Plasma sprayed ceramic coatings are successfully used in many industrial applications,
where high wear and corrosion resistance with thermal insulation are required. Plasma …

Study on erosion–wear behavior and mechanism of plasma-sprayed alumina-based coatings by a novel slurry injection method

K Yang, J Rong, C Liu, H Zhao, S Tao, C Ding - Tribology International, 2016 - Elsevier
In this paper, Al 2 O 3–Cr 2 O 3 composite coating was fabricated by plasma spraying. It has
better mechanical performances than Al 2 O 3 coating. Erosion–wear resistance of the …

Production and corrosion resistance of thermally sprayed Fe-based amorphous coatings from mechanically milled feedstock powders

GY Koga, AM Jorge Junior, V Roche… - … Materials Transactions A, 2018 - Springer
Mechanically milled FeCrNbB feedstock powders from commercial precursors were used to
produce amorphous coatings through two different industrial thermal-spraying techniques …

In-situ fabrication of amorphous/eutectic Al2O3–YAG ceramic composite coating via atmospheric plasma spraying

K Yang, J Rong, J Feng, Y Zhuang, S Tao… - Journal of the European …, 2016 - Elsevier
The microstructure and property of plasma-sprayed Al 2 O 3–Y 3 Al 5 O 12 (YAG) composite
coatings were investigated. The sprayable feedstock was composed of Al 2 O 3/Y 2 O 3 …

In situ nanostructured ceramic matrix composite coating prepared by reactive plasma spraying micro-sized Al–Fe2O3 composite powders

Y Yang, D Yan, Y Dong, L Wang, X Chen… - Journal of Alloys and …, 2011 - Elsevier
In situ nanostructured ceramic matrix composite coating was prepared by reactive plasma
spraying micro-sized Al–Fe2O3 composite powders. The microstructure of the composite …

Effect of TiO2 addition on the microstructure and nanomechanical properties of Al2O3 Suspension Plasma Sprayed coatings

E Bannier, M Vicent, E Rayón, R Benavente… - Applied Surface …, 2014 - Elsevier
Alumina–titania coatings are widely used in industry for wear, abrasion or corrosion
protection components. Such layers are commonly deposited by atmospheric plasma …

Laser remelting of plasma-sprayed conventional and nanostructured Al2O3–13 wt.% TiO2 coatings on titanium alloy

C Li, Y Wang, L Guo, J He, Z Pan, L Wang - Journal of alloys and …, 2010 - Elsevier
Plasma-sprayed microstructured and nanostructured Al2O3–13wt.% TiO2 coatings were
successfully deposited on Ti–6Al–4V titanium alloy substrates with commercial Metco 130 …

Sliding Wear Performance of Plasma-Sprayed Al2O3-Cr2O3 Composite Coatings Against Graphite under Severe Conditions

K Yang, X Zhou, C Liu, S Tao, C Ding - Journal of thermal spray …, 2013 - Springer
Abstract Al 2 O 3, Cr 2 O 3, and Al 2 O 3-Cr 2 O 3 composite coatings were produced by
plasma spraying. Their tribological properties were evaluated at high load conditions. The …

Deposition of nanostructured YSZ coating from spray-dried particles with no heat treatment

Y Zhao, Y Gao - Applied Surface Science, 2015 - Elsevier
Ytrria stabilized zirconia (YSZ) nanoparticle agglomerates were fabricated by a spray dry
method and were directly sprayed using atmospheric plasma spraying (APS) with a current …

Effect of powder particle size on vibration damping behaviour of plasma sprayed alumina (Al2O3) coating on AISI 304 stainless steel substrate

KB Sachidananda, K Mahesha, A Dey - Ceramics International, 2018 - Elsevier
The damping capacity of plasma sprayed alumina (Al 2 O 3) coatings on AISI 304 stainless
steel was investigated in this study as a function of particle size of the starting alumina …