This paper studied the microstructure and corrosion behavior of Mg-xSc binary alloy (x= 0.1–
1.5 wt.%) sheets. Sc has a significant effect of refining grains of Mg. The Mg-Sc binary alloys …

The influence of surface mechanical attrition treatment (SMAT) on the corrosion behaviour of
AISI 304 stainless steel in 0.6 M NaCl was studied. SMAT of 304 SS induced plastic …

The influence of surface mechanical attrition treatment (SMAT) on the corrosion behaviour of
AISI 409 grade stainless steel in 0.6 M NaCl was studied. SMAT using 2mm∅ 316L stainless …

An ultrahigh corrosion resistance of Mg-Er alloys was achieved via a simple method by
forming an Er 2 O 3 oxide film using a high temperature treatment. The corrosion rate of Mg …

Nickel coatings were prepared at different concentrations of NH 4 Cl as a crystal modifier in
the electrodeposition bath. Surface morphology, wettability and the preferred orientation of …

This study evaluated the grain size effect of Inconel 625 film against molten chloride salt. It is
found that larger grain size Inconel 625 exhibits better corrosion resistance by reducing Cr …

The nanocrystalline pure nickels with different grain orientations were fabricated by direct
current electrodeposition process. The grain size slightly decreased with the increasing of …

AISI 301 stainless steel (SS) is known for its high strength and hardness but tends to be less
corrosion resistant for many applications. Several attempts have been made in the past to …

The corrosion properties of nanostructured 17-4PH stainless steel facilitated by a surface
mechanical attrition treatment (SMAT) process were studied using electrochemical …

A comparative study has been carried out on microstructural evolution, surface roughness,
nanoindentation and scratch behavior, electrical resistivity, and corrosion resistance of Ni 1 …