TiO2 (0–10 wt%)-doped nanocrystalline Ni0. 4Cu0. 3Zn0. 3Fe2O4 (Ni–Cu–Zn) ferrites were
synthesized using the sol–gel route of synthesis. The cubic spinel structure of the ferrites …

Abstract Nanophased Ni 0.65 Zn 0.35 Cu x Fe (2–2x/3) O 4, ferrites with lower dopant
concentrations ie, for x ranging from 0 to 0.05 in steps of 0.01 have been synthesized using …

Abstract Ni 0· 4 Cu 0· 2 Zn 0.4 Dy x Fe 2-x O 4 (x≤ 0.10)(NCZDy) nanospinel ferrites (NSFs)
were prepared by an ultrasonication approach assisted sol-gel synthesis methodology. The …

Al substituted M type Ca hexaferrite with composition CaAl x Fe 12-x O 19 (x= 0, 0.2, 0.4, 0.6,
0.8) were synthesized by sol gel auto combustion method. The prepared samples were …

Abstract Zinc-Nickel Ferrite (Zn (1− x) Ni x Fe 2 O 4) nanoparticles were synthesized by
solution combustion method using urea as a fuel and varying the cation concentration (x= 0 …

Magnetite nanoparticles (α-Fe3O4) were successfully prepared by a chemical co-
precipitation technique. Modification in electrical properties of α-Fe3O4 by Cu2+ dopant for …

The Ag-substituted copper-zinc ferrite Zn 0.5 Cu (0.5− x) Ag x Fe 2 O 4, with changing
compositions (x= 0, 0.02, 0.04, 0.06, 0.08 and 0.1), was prepared using the solution …

Spinel ferrite Ni 0. 0 8 Mn 0. 9 0 Zn 0. 0 2 Fe2O4 was prepared by a conventional ceramic
process followed by sintering at three different temperatures (1050∘ C, 1100∘ C and 1150∘ …

Ferro spinels with composition Ni 0.2 Cu 0.2 Zn 0.6 Fe 2− x Al x O 4 (x= 0.0 to 1.0 in steps of
0.2) were synthesized by co-precipitation method, in oxygen atmosphere, from …

Abstract Nickel-copper-zinc (NiCuZn) ferrites are widely used in high-frequency fields due to
their low eddy current losses as well as high resistivity, but which are greatly affected by their …