[PDF][PDF] Light curing of resin-based composites in the LED era.
N Kramer, U Lohbauer, F Garcia-Godoy… - American journal of …, 2008 - amjdent.com
This review thoroughly accumulated information regarding new technologies for state-of-the-
art light curing of resin composite materials. Visible light cured resin-based composites allow …
art light curing of resin composite materials. Visible light cured resin-based composites allow …
Post-cure depth of cure of bulk fill dental resin-composites
Objectives To determine the post-cure depth of cure of bulk fill resin composites through
using Vickers hardness profiles (VHN). Methods Five bulk fill composite materials were …
using Vickers hardness profiles (VHN). Methods Five bulk fill composite materials were …
Rheological and mechanical properties of resin-based materials applied in dental restorations
X Zhang, Q Zhang, X Meng, Y Ye, D Feng, J Xue… - Polymers, 2021 - mdpi.com
Resin-based materials have been prevalent for dental restorations over the past few
decades and have been widely used for a variety of direct and indirect procedures …
decades and have been widely used for a variety of direct and indirect procedures …
Collagen cross-linkers on dentin bonding: Stability of the adhesive interfaces, degree of conversion of the adhesive, cytotoxicity and in situ MMP inhibition
Objective To investigate the effect of collagen cross-links on the stability of adhesive
properties, the degree of conversion within the hybrid layer, cytotoxicity and the inhibition …
properties, the degree of conversion within the hybrid layer, cytotoxicity and the inhibition …
Polymerization kinetics and impact of post polymerization on the Degree of Conversion of bulk-fill resin-composite at clinically relevant depth
Objective Since bulk-fill (BF) resin composites should cure efficiently to a depth up to 4 mm,
the aim of the study was to determine the time-dependence of degree of conversion (DC) at …
the aim of the study was to determine the time-dependence of degree of conversion (DC) at …
Factors contributing to the incompatibility between simplified-step adhesives and chemically-cured or dual-cured composites. Part III. Effect of acidic resin monomers.
BI Suh, L Feng, DH Pashley… - Journal of Adhesive …, 2003 - search.ebscohost.com
Purpose: This study examined the polymerization kinetics of acid-contaminated light-and
chemically-cured resins with the use of differential scanning calorimetry. Materials and …
chemically-cured resins with the use of differential scanning calorimetry. Materials and …
Degree of conversion and microhardness of TPO-containing resin-based composites cured by polywave and monowave LED units
OBJECTIVES: To determine the degree of conversion (DC) and Knoop microhardness
(KHN) of resin-based composites (RBCs) containing trimethylbenzoyl-diphenylphosphine …
(KHN) of resin-based composites (RBCs) containing trimethylbenzoyl-diphenylphosphine …
Composite resin color stability: influence of light sources and immersion media
PAS Domingos, PPNS Garcia… - Journal of Applied Oral …, 2011 - SciELO Brasil
OBJECTIVE: This study evaluated the influence of light sources and immersion media on the
color stability of a nanofilled composite resin. MATERIAL AND METHODS: Conventional …
color stability of a nanofilled composite resin. MATERIAL AND METHODS: Conventional …
Depth of cure and surface microhardness of composite resin cured with blue LED curing lights
PCL Tsai, IA Meyers, LJ Walsh - Dental Materials, 2004 - Elsevier
Objectives. This study examined the depth of cure and surface microhardness of Filtek Z250
composite resin (3M-Espe)(shades B1, A3, and C4) when cured with three commercially …
composite resin (3M-Espe)(shades B1, A3, and C4) when cured with three commercially …
Correlation between degree of conversion, resin–dentin bond strength and nanoleakage of simplified etch-and-rinse adhesives
V Hass, M Dobrovolski, C Zander-Grande, GC Martins… - Dental materials, 2013 - Elsevier
Objectives The aim of this study was to correlate the degree of conversion measured inside
the hybrid layer (DC) with the microtensile resin–dentin bond strength (μTBS) and silver …
the hybrid layer (DC) with the microtensile resin–dentin bond strength (μTBS) and silver …