Plane strain hot compression tests of 5754 aluminum alloy were conducted on a Gleeble-
3500 thermo-mechanical simulator under various conditions. These tests simulated flat …

The effect of rare-earth (RE) elements on the hot deformation behavior of an extruded Mg–3
wt% Al–1 wt% Zn (AZ31) alloy was studied. Compression tests were conducted in a …

The strain hardening effect and dynamic recovery behavior of a Ni-based superalloy are
studied by isothermal compressive tests. A new unified dislocation-density based …

The deformation mechanisms and dynamic softening behavior of a Ti–6Al–4V alloy with
thick lamellar microstructures are studied by uniaxial hot tensile tests. The true stress first …

Hot deformation behaviors of two pre-treated nickel-based superalloys are investigated over
wide ranges of strain rate and temperature. Based on the theory of dynamic material model …

Abstract Effects of initial δ phase (Ni 3 Nb) on the hot tensile deformation behaviors and
material constants of a Ni-based superalloy were investigated over wide ranges of strain …

The compressive behavior of hybrid short fiber/particle composites was examined by using
finite element analysis and representative volume element models for two different particle …

The uniaxial hot compression experiments of Mg-7Gd-3Y-0.5 Zr (VW73K) alloy were carried
out by using the Instron5982 mechanical testing machine with environmental box. The hot …

Influence of constraint condition on rolling behavior of a magnesium alloy sheet at low
temperature was investigated by embedding the magnesium alloy sheet within a block of an …

Hot plane strain compression tests of 6013 aluminum alloy were conducted at temperatures
ranging from 613 to 773 K and strain rates ranging from 10-3 to 10 s-1. A novel model is …