Electrodeposition is considered as an easy and cost effective technique for preparation of
alloy coating. A wide variety of properties for coatings can be achieved by selecting different …

Single-layer and multilayer alloy deposits were coated onto a mild steel substrate by a
single-bath electroplating process. The developed coating consists of Zn and Fe alloys …

We report on the electrodeposition of a zinc-nickel alloy using a sulphate bath on mild steel
(MS) substrate. The Hull cell experiment was used to optimize the bath composition and …

Zinc–Nickel monolayer (single layer) and compositionally modulated multilayer alloy
coatings were developed on to mild steel from acidic sulphate bath; and their corrosion …

Abstract Zn–Ni and Zn–Ni–Al 2 O 3 multilayer coatings with 32, 128, and 512 layers were
electroplated on a low carbon steel substrate by pulse electrodeposition under alternative …

Zn-Co compositionally modulated multilayer alloy (CMMA) deposits have been developed
onto mild steel using single bath technique. Multilayer alloy coatings have been …

Ni–Fe–Cr multilayer coatings were successfully electrodeposited on the mild carbon steel.
The frequent variation of pulse duty cycle between two values of 20 and 90% prepared …

Zn-Fe compositionally modulated multilayer alloy (CMMA) coatings were developed onto
low carbon steel from acid sulphate bath; and their corrosion resistance was calculated …

Zn-Ni alloy gradient coating with current density gradients of 1-5 A/dm2 was prepared for a
steel substrate and then applied to its surface to improve its corrosion resistance. The …

Electrodeposition of Zinc-Iron alloy has been used to improve the corrosion resistance of
mild steel. This alloy plating was successfully coated on mild steel using the …