Soot formation in high pressure laminar diffusion flames
AE Karataş, ÖL Gülder - Progress in Energy and Combustion Science, 2012 - Elsevier
The details of the chemical and physical mechanisms of the soot formation process in
combustion remain uncertain due to the highly complex nature of hydrocarbon flames, and …
combustion remain uncertain due to the highly complex nature of hydrocarbon flames, and …
[HTML][HTML] Can laser-induced incandescence calibrated by laser extinction method be used for quantitative determination of soot volume fraction in laminar flames?
Z Zhang, L Zhou, X He - Applications in Energy and Combustion Science, 2023 - Elsevier
This review is conducted to assess the effectiveness of the laser extinction method (LEM)
calibrated laser-induced incandescence (LII) to quantitatively determine the soot volume …
calibrated laser-induced incandescence (LII) to quantitatively determine the soot volume …
[HTML][HTML] Pressure-dependent weighted-sum-of-gray-gases models for heterogeneous CO2-H2O mixtures at sub-and super-atmospheric pressure
The effect of total pressure of gas mixture is included in the development of new coefficients
for the weighted-sum-of-gray-gases model (WSGG). The WSGG formulation previously …
for the weighted-sum-of-gray-gases model (WSGG). The WSGG formulation previously …
Investigation of soot suppression by ammonia addition to laminar ethylene flames at varying pressure
Blending ammonia with hydrocarbon fuels is a promising pathway to expedite its use in
different industries, as it might offer a good compromise between energy output and …
different industries, as it might offer a good compromise between energy output and …
A numerical study on the effects of pressure and gravity in laminar ethylene diffusion flames
The effects of pressure and gravity on sooting characteristics and flame structure were
studied numerically in coflow ethylene–air laminar diffusion flames between 0.5 and 5atm …
studied numerically in coflow ethylene–air laminar diffusion flames between 0.5 and 5atm …
Effects of gravity and pressure on laminar coflow methane–air diffusion flames at pressures from 1 to 60 atmospheres
The effects of pressure and gravity on the sooting characteristics and flame structure of
coflow methane–air laminar diffusion flames between 1 and 60atm were studied …
coflow methane–air laminar diffusion flames between 1 and 60atm were studied …
Influence of sub-atmospheric pressure on flame shape and sooting propensity in ethylene laminar coflow non-premixed flame
Sooting flames have been a longstanding research topic and an extensive literature has
been developed at both atmospheric and high pressure. In contrast, studies of sooting …
been developed at both atmospheric and high pressure. In contrast, studies of sooting …
Dependence of sooting characteristics and temperature field of co-flow laminar pure and nitrogen-diluted ethylene–air diffusion flames on pressure
AE Karataş, ÖL Gülder - Combustion and Flame, 2015 - Elsevier
Pressure dependence of sooting characteristics and the flame temperature field of pure
ethylene and ethylene diluted with nitrogen in co-flow laminar diffusion flames was …
ethylene and ethylene diluted with nitrogen in co-flow laminar diffusion flames was …
Influence of thermal radiation on soot production in laminar axisymmetric diffusion flames
The aim of this paper is to study the effect of radiative heat transfer on soot production in
laminar axisymmetric diffusion flames. Twenty-four C1–C3 hydrocarbon–air flames …
laminar axisymmetric diffusion flames. Twenty-four C1–C3 hydrocarbon–air flames …
Identifying the roles of reduced gravity and pressure on the piloted ignition of solid combustibles
S Fereres, C Fernandez-Pello, DL Urban, GA Ruff - Combustion and Flame, 2015 - Elsevier
The influence of environmental conditions on solid fuel ignition is of particular interest in
spacecraft fire safety because of the large difference in environments between a spacecraft …
spacecraft fire safety because of the large difference in environments between a spacecraft …