Austenitic stainless steels are employed in many industrial fields, due to their excellent
corrosion resistance, easy formability and weldability. However, their low hardness, poor …

Fatigue is a dominant failure mechanism of several engineering components. One
technique for increasing the fatigue life is by inducing surface residual stress to inhibit crack …

Metallic materials experience irreversible deformation with increasing applied stress,
manifested in localized slip events that result in fatigue failure upon repeated cycling. We …

Additively manufactured 316L stainless steels display significantly higher yield strength than
their as-cast or wrought counterparts. This is associated with the micro-scale cellular …

It has generally been believed that the formation of the S phase or expanded austenite γ N
with enough thickness depends on the temperature (lower than 480° C) and duration of the …

Книга представляет собой подробное справочное руководство по основам плазменной
химико-термической обработки поверхности стальных деталей. В ней обобщены …

The widespread use of proton exchange membrane water electrolyzers (PEMWE) is
hindered by their high cost, of which a colossal factor is caused by the bipolar plates (BPP) …

Correlations between the grain orientations and elastic properties of plasma-nitrided
polycrystalline 316L austenitic stainless steel are investigated. The grain orientations (hkl) in …

The nature of the near-surface γN phase produced by low-temperature (∼ 400° C) plasma-
assisted nitriding of an austenitic stainless steel 304L is studied. A combination of global …

In the present work, a combined surface treatment of surface texturing-double glow plasma
surface titanizing was performed on AISI 316 stainless steel (316 SS) to improve its wear …