Fe‐based amorphous and nanocrystalline alloys are widely used in transformers, electronic
information, and aerospace applications due to their high saturation flux density (Bs), high …

Abstract FeSiB, FeSiBAl and FeSiBTi coatings were fabricated on S355 steel using a laser
cladding (LC). The surface and cross–section morphologies, chemical elements and phases …

The influence of P on amorphizing ability, as-quenched microstructure, thermo-physical and
soft magnetic properties of Fe–rich (i) Fe 81 B 15-x P x Si 2 Nb 1 Cu 1 (ii) Fe 82 B 14-x P x Si …

The electromagnetic interference shielding effectiveness (EMI SE) of amorphous and
annealed melt-spun ribbons having typical composition of Co 72.5 Si 12.5 B 15,(Fe 0.65 Co …

The film-based magnetic sensors possess prominent superiorities in miniaturization and
integration. Because of the presence of shape demagnetization, the magnetic film effective …

In this work magnetic properties, magnetoimpedance (MI) and field sensitivity (η) of rapidly
solidified (Fe 0.7 Co 0.3) 80 B 19 M 1 (M= B, Al, Si & Cu) ribbons have been investigated in …

FeCo nanoparticles coated with (Fe, Co) 3O4 (magnetite doped with cobalt) were
synthesized by the proteic sol-gel chemical route. The synthesized materials were …

Co x Fe 100− x thin films are thermally evaporated under vacuum onto glass substrate. The
structural and magnetic properties of these films are investigated as a function of cobalt …

To develop an excellent low-dimensional magnetic material, the evolution of microstructure
and soft magnetic properties in thin films with thickness as well as annealing treatment has …

Abstract (Fe 0.5 Co 0.5) 73.5 Si 13.5 Nb 3 Cu 1 B 9-x Al x (x= 0.2, 0.4, 0.6, 0.8)
nanocrystalline alloys were investigated with the aim of improving the soft magnetic …