In this work, the effect of vibration on the mechanical, corrosion and wear characteristics of
AZ91 composite layers fabricated by a modified friction stir processing has been examined …

Friction stir welding (FSW) is a promising joining technique offering safety, repeatability,
reduced energy consumption, no need for shielding gases and consumables, and no …

The increasing industrial demand to reduce structural weight, optimize structural strength,
and high performance has led to the increasing use of tailors welded blanks. However, the …

The friction stir welding joints of Al-Zn-Mg-Cu alloy were prepared, then their stress
corrosion evolution during slow strain rate tensile testing was studied by in-situ …

Welding of heat-treated AA6061-T6 often results in mechanical and wear properties
deterioration because of the dissolution of the strengthening precipitates at the joint …

Influence of welding process parameters on stress corrosion cracking (SCC) sensitivity
through thickness of 12 mm thick AA7085-T7452 joints by single-sided and double-sided …

This work consists of two parts. In the first part, the kinetics and mechanism of corrosion on
the surface of the welded joint area of the aircraft 1579 aluminium alloy have been studied …

Dissimilar friction stir welding of AA5083-AA6061 alloys in different cooling environments
(air, liquid nitrogen, and water) was successfully employed as an alternative method to …

The aluminum alloys joints welded by friction stir welding (FSW) are usually fractured in or
near the thermo-mechanically affected zone (TMAZ) of the welded zone, and different …

Abstract Butt joining of Al-Mg-Si alloys with 6.0 mm in thickness was made with conventional
rotational shoulder friction stir welding (RSFSW) and non-rotational shoulder friction stir …