Chatter is a self-excited vibration that can occur during machining operations and become a
common limitation to productivity and part quality. For this reason, it has been a topic of …

Chatter vibrations are present in almost all cutting operations and they are major obstacles
in achieving desired productivity. Regenerative chatter is the most detrimental to any …

High speed machining of low rigidity structures is a widely used process in the aeronautical
industry. Along the machining of this type of structures, the so-called monolithic components …

The development of a chatter detection system based on multiple sensors and suitable for
application in industrial conditions was investigated in this paper. The signals obtained from …

This paper presents a novel method for programming spindle speed variation for machine
tool chatter suppression. This method is based on varying the spindle speed for minimum …

It is well known that regenerative chatter can result in excessive tool wear, poor surface
finish, and hence limited productivity during metal machining. Various mitigation methods …

Chatter is an instability phenomenon in machining processes which limits productivity and
results in inferior workpiece quality, noise and rapid tool wear. The increasing demand for …

Regenerative chatter is one of the most deleterious phenomena affecting machining
operations. It affects the integrity of the tool and the achievement of the targeted performance …

This report presents a tool condition monitoring technique for deep-hole drilling that will
ensure the quality of precision large-scale components. To avoid catastrophic tool failure, in …

This paper presents a new method for varying the spindle speed to suppress chatter in
machining. The spindle speed is varied in a pseudo-random fashion within the bandwidth of …