A comparative study of Cu-anchored 0D and 1D ZnO nanostructures for the reduction of organic pollutants in water
In this work, Cu NPs were loaded at a fixed percentage (5 wt%) on 1D,(1D+ 0D) and 0D ZnO
nanostructures to investigate the effect of the support morphology on the reduction of …
nanostructures to investigate the effect of the support morphology on the reduction of …
Patterned ZnO nanorods/indium sulfide based self-powered photoelectrochemical photodetectors
The present work reports the excellent alignment of zinc oxide nanorod arrays (ZnO NRAs)
patterned via the maskless lithography technique which was used as a photoanode material …
patterned via the maskless lithography technique which was used as a photoanode material …
Spinel-type ferrites decorated ZnO for enhanced photoelectrochemical water splitting
L Wu, T Han, M Zhang, L Gao, Z Yang, N Ding, J Jin - Optical Materials, 2022 - Elsevier
Among numerous semiconductor photoanodes, ZnO has been widely touted for its high
electron mobility in the realm of Photoelectrochemical water splitting. However, some …
electron mobility in the realm of Photoelectrochemical water splitting. However, some …
Effect of anatase-rutile phase ratio of titania photoanode on photoelectrochemical performance and photoconversion efficiency
P Ningthoukhongjam, M Bhagavathiachari, RG Nair - Optical Materials, 2022 - Elsevier
Modification of photoanode is an emerging technique to achieve improved photoconversion
efficiency in Dye Sensitized Solar Cells (DSSCs). Many strategies have been used to …
efficiency in Dye Sensitized Solar Cells (DSSCs). Many strategies have been used to …
Modulation of ZnO Nanostructure for Efficient Photocatalytic Performance
P Long, H Peng, B Sun, J Lan, J Wan, Y Fei… - Nanoscale Research …, 2022 - Springer
Abstract Structure has been considered to play an important role in photocatalytic
performance of the semiconductors, but the intrinsic factors were rarely revealed. Herein …
performance of the semiconductors, but the intrinsic factors were rarely revealed. Herein …
[PDF][PDF] 二氧化锡基染料敏化太阳能电池电子传输模型优化及器件性能研究
程友良， 杜慧彬， 张忠宝， 王凯 - Journal of Synthetic Crystals, 2024 - researching.cn
针对染料敏化太阳能电池(DSSC) 而言, 其光阳极的材料特性与设计参数对DSSC
性能具有显著影响. 为了深入研究这一影响, 本文采用数值模拟的方式, 以探究光阳极结构变化对 …
性能具有显著影响. 为了深入研究这一影响, 本文采用数值模拟的方式, 以探究光阳极结构变化对 …
Development and validation of an improved model for Dye-sensitized solar cell and estimation of the optimum design parameters for maximum performance
Objective The performance of a Dye-Sensitized Solar Cell (DSSC) mainly depends on
specific surface area, dye loading, pore-volume, thickness of the semiconductor layer, and …
specific surface area, dye loading, pore-volume, thickness of the semiconductor layer, and …
Effect of Co2+ substitution into zinc oxide host lattice via electrodeposition cum hydrothermal approach for enhancing dye synthesized solar cell performance
MB Ahmed, TA Khan, AS Awan, H Waqas - Chemical Papers, 2022 - Springer
Abstract Pure and cobalt-doped (1, 3, 3.5 wt%) zinc oxide nanostructures were synthesized
by two–step method. At first, zinc/cobalt alloys were deposited on copper substrate via …
by two–step method. At first, zinc/cobalt alloys were deposited on copper substrate via …